Disclaimer
How to change spark plugs on TOYOTA Camry Saloon (_V3_) – replacement guide
downloads:
3
Views:
31
Recommended replacement interval for the part category Spark plug : 4 year / 60000 km
Important!
This replacement procedure can be used for:
TOYOTA Camry Saloon (_V3_) 2.0 (ACV31_), TOYOTA Camry Saloon (_V3_) 2.4 (ACV30, ACV36) … View more
The steps may slightly vary depending on the car design.
TOYOTA Camry Saloon (_V3_) 2.0 (ACV31_), TOYOTA Camry Saloon (_V3_) 2.4 (ACV30, ACV36) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Camry Saloon (_V3_) and other TOYOTA models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – TOYOTA CAMRY (MCV3_, ACV3_, _XV3_). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA CAMRY (MCV3_, ACV3_, _XV3_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the engine cover fastener. Use a drive socket #10. Use a ratchet wrench. - Step 4
Remove the engine cover. - Step 5
Unplug the connectors from the ignition coils. - Step 6
Unscrew the ignition coil bracket. Use a drive socket #10. - Step 7
Remove the fastening bolts. - Step 8
Take out the ignition coil from the spark plug well.Replacement: spark plugs – TOYOTA CAMRY (MCV3_, ACV3_, _XV3_). Tip:Remember the sequence of steps for ignition coil demounting. - Step 9
Clean dirt, dust and debris from inside the spark plug wells. - Step 10
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 11
Take out the spark plugs. - Step 12
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease. - Step 13
Install the new spark plugs into their mounting seats. - Step 14
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – TOYOTA CAMRY (MCV3_, ACV3_, _XV3_). Tip from AUTODOC experts:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Camry V Saloon (_V3_) model
Popular maintenance tutorials for TOYOTA CAMRY (MCV3_, ACV3_, _XV3_)
Complete guides for changing the Engine spark plug on different TOYOTA CAMRY models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Camry Saloon (_V3_)
View more
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
How to prevent car windows from fogging up | AUTODOC tips
How to unlock your car without a key | AUTODOC tips
Most commonly replaced car parts on TOYOTA CAMRY
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

























