
Disclaimer
How to change spark plugs on TOYOTA Camry Saloon (_V4_) – replacement guide
downloads:
3
Views:
15

Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
TOYOTA Camry Saloon (_V4_) 2.4 (ACV40_), TOYOTA Camry Saloon (_V4_) 2.4 Hybrid (AHV40_), TOYOTA Camry Saloon (_V4_) 2.0 (ACV41_), TOYOTA Camry Saloon (_V4_) 2.4 (ACV40_) … View more
The steps may slightly vary depending on the car design.
TOYOTA Camry Saloon (_V4_) 2.4 (ACV40_), TOYOTA Camry Saloon (_V4_) 2.4 Hybrid (AHV40_), TOYOTA Camry Saloon (_V4_) 2.0 (ACV41_), TOYOTA Camry Saloon (_V4_) 2.4 (ACV40_) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for Camry Saloon (_V4_) and other TOYOTA models
Spark plug
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 10
Spark plug socket # 16
Ratchet wrench
Torque wrench
Fender cover
Replacement: spark plugs – TOYOTA CAMRY Saloon (_XV4_). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – TOYOTA CAMRY Saloon (_XV4_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the engine cover fastener. Use a drive socket #10. Use a ratchet wrench.
- Step 4Remove the engine cover.
- Step 5Unplug the connectors from the ignition coils.
- Step 6Unscrew the ignition coil bracket. Use a drive socket #10.
- Step 7Remove the fastening bolts.
- Step 8Take out the ignition coil from the spark plug well.Replacement: spark plugs – TOYOTA CAMRY Saloon (_XV4_). Tip:Remember the sequence of steps for ignition coil demounting.
- Step 9Clean dirt, dust and debris from inside the spark plug wells.
- Step 10Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 11Take out the spark plugs.
- Step 12Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. Treat the surface of the terminals of the new spark plugs. Use high-temperature grease.
- Step 13Install the new spark plugs into their mounting seats.
- Step 14Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – TOYOTA CAMRY Saloon (_XV4_). Tip from AUTODOC experts:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Camry VI Saloon (_V4_) model
Popular maintenance tutorials for Toyota Camry XV40
Complete guides for changing the Engine spark plug on different TOYOTA CAMRY models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA Camry Saloon (_V4_)
View more
- DIY vehicle AC compressor restoration
- How I started restoring a driveshaft | Drivetrain restoration – Part 1
- How to Make a DIY Foam Sprayer | AUTODOC tips
- Deep interior cleaning | Car transformation by detailing
Most commonly replaced car parts on TOYOTA CAMRY
Time to replace parts? Get even better deals in our Shop app.

SCAN ME