
Disclaimer
How to change spark plugs on RENAULT TWINGO I Box (S06_) – replacement guide
downloads:
1
Views:
16

Recommended replacement interval for the part category Spark plug : 20000 km
Important!
This replacement procedure can be used for:
RENAULT TWINGO I Box (S06_) 1.2, RENAULT TWINGO I Box (S06_) 1.2 (S066, S068) … View more
The steps may slightly vary depending on the car design.
RENAULT TWINGO I Box (S06_) 1.2, RENAULT TWINGO I Box (S06_) 1.2 (S066, S068) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for TWINGO I Box (S06_) and other RENAULT models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Spark plug socket # 16
Round-nose pliers
Torque wrench
Fender cover
Replacement: spark plugs – RENAULT TWINGO I Box (S06_). Professionals recommend:
- The replacement procedure is the same for all spark plugs.
- Warning! Shut down the engine before starting any work – RENAULT TWINGO I Box (S06_)
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover.
- Step 4Remove the spark plug wire connectors from the spark plug wells. Use round-nose pliers.Replacement: spark plugs – RENAULT TWINGO I Box (S06_). Tip from AUTODOC:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
- Step 5Clean dirt, dust and debris from inside the spark plug wells.
- Step 6Unscrew the spark plugs. Use the spark plug socket #16.
- Step 7Take out the spark plugs. Use the spark plug socket #16.
- Step 8Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 9Install the new spark plugs into their mounting seats. Use the spark plug socket #16.Step 10Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – RENAULT TWINGO I Box (S06_). AUTODOC experts recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Twingo I Van model
Popular maintenance tutorials for Renault Twingo 1 Van
Complete guides for changing the Engine spark plug on different RENAULT TWINGO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT TWINGO I Box (S06_)
View more
- Top Automatic Transmission Blunders You Must Dodge | AUTODOC Insights
- How I started restoring a driveshaft | Drivetrain restoration – Part 1
- Top 5 car noises you shouldn't ignore
- BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
Most commonly replaced car parts on RENAULT TWINGO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME