Disclaimer
How to change spark plugs on PEUGEOT 208 Van (CR_) – replacement guide
downloads:
3
Views:
145
Recommended replacement interval for the part category Spark plug : 18 month / 30000 km
Important!
This replacement procedure can be used for:
PEUGEOT 208 Van (CR_) 1.2 VTI / PureTech (CRHMZ6, CRHMRP) … View more
The steps may slightly vary depending on the car design.
PEUGEOT 208 Van (CR_) 1.2 VTI / PureTech (CRHMZ6, CRHMRP) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for 208 Van (CR_) and other PEUGEOT models
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Drive socket # 8
Spark plug socket # 16
Torque wrench
Flat Screwdriver
Fender cover
Replacement: spark plugs – PEUGEOT 208 Box. AUTODOC recommends:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – PEUGEOT 208 Box. Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unplug the connectors from the ignition coils. Use a flat screwdriver. - Step 4
Unscrew the ignition coil bracket. Use a drive socket #8. - Step 5
Take out the ignition coils from the spark plug wells.Replacement: spark plugs – PEUGEOT 208 Box. Professionals recommend:Remember the sequence of steps for ignition coil demounting. - Step 6
Clean dirt, dust and debris from inside the spark plug wells. - Step 7
Unscrew the spark plugs. Use the spark plug socket #16. - Step 8
Take out the spark plugs. - Step 9
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 10
Install the new spark plugs into their mounting seats. - Step 11
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 22 nm torque.Replacement: spark plugs – PEUGEOT 208 Box. Tip from AUTODOC experts:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the PEUGEOT 208 Van (CR_) model
Popular maintenance tutorials for Peugeot 208 Van
Complete guides for changing the Engine spark plug on different PEUGEOT 208 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your PEUGEOT 208 Van (CR_)
View more
Fuse Replacement Made Simple: Step-by-Step Guide | AUTODOC
5 mistakes when replacing consumables
Motorcycle fuel tank restoration
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
Most commonly replaced car parts on PEUGEOT 208
Time to replace parts? Get even better deals in our Shop app.

SCAN ME



















