
Disclaimer
How to change spark plugs on MAZDA 323S IV Saloon (BG) – replacement guide
downloads:
14
Views:
219

Recommended replacement interval for the part category Spark plug : 1 year / 20000 km
Important!
This replacement procedure can be used for:
MAZDA FAMILIA IV (BG) 1.6 (BG6S) … View more
The steps may slightly vary depending on the car design.
MAZDA FAMILIA IV (BG) 1.6 (BG6S) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for FAMILIA IV (BG) and other MAZDA models
Spark plug
Alternative products

Electronic spray
High-temperature anti-seize lubricant
Spark plug socket # 16
Ratchet wrench
Torque wrench
Flat Screwdriver
Fender cover
Replacement: spark plugs – MAZDA FAMILIA IV (BG). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – MAZDA FAMILIA IV (BG). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the engine cover fastener. Use a flat screwdriver.
- Step 4Remove the engine cover.
- Step 5Unplug the connectors from the ignition coils. Use a flat screwdriver.
- Step 6Take out the ignition coils from the spark plug wells.Replacement: spark plugs – MAZDA FAMILIA IV (BG). Tip from AUTODOC experts:Remember the sequence of steps for ignition coil demounting.
- Step 7Clean dirt, dust and debris from inside the spark plug wells.Step 8Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 9Take out the spark plugs.
- Step 10Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 11Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 12Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 27 nm torque.Replacement: spark plugs – MAZDA FAMILIA IV (BG). AUTODOC recommends:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MAZDA 323S IV Saloon (BG) model
Popular maintenance tutorials for Mazda 323 BG
Complete guides for changing the Engine spark plug on different MAZDA 323 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MAZDA FAMILIA IV (BG)
View more
- How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
- 5 mistakes when replacing consumables
- How to fix your car with AUTODOC CLUB
- Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
Most commonly replaced car parts on MAZDA 323
Time to replace parts? Get even better deals in our Shop app.

SCAN ME