Replace the stabiliser links on Mazda 3 BK in pairs.
The replacement procedure is identical for both stabiliser links on the same axle.
Please note: all work on the car – Mazda 3 BK – should be done with the engine switched off.
Carry out replacement in the following order:
Step 1
Secure the wheels with chocks.
Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19.
Step 3
Raise the front of the car and secure on supports.
Step 4
Unscrew the wheel bolts.
AUTODOC recommends:
Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Mazda 3 BK
Step 5
Remove the wheel.
Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
Step 7
Unscrew the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use a drive socket #14. Use a ratchet wrench.
Step 8
Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #15 (2 pieces).
Step 9
Remove the stabilizer rod.
Replacement: anti roll bar links – Mazda 3 BK. Professionals recommend:
Examine stabiliser bushes. Replace them if needed.
Step 10
Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
Step 11
Install a new rod, tighten the fasteners.
Step 12
Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #15 (2 pieces). Use a torque wrench. Tighten it to 50 Nm torque.
Step 13
Tighten the fastener connecting the stabilizer link to the shock strut. Use a combination spanner #15. Use a drive socket #14. Use a torque wrench. Tighten it to 50 Nm torque.
Step 14
Treat all joints of the stabiliser link. Use copper grease.
Step 15
Treat the surface where the brake disc contacts the wheel rim. Use copper grease.
Step 16
Clean the brake disk surface. Use a brake cleaner.
AUTODOC recommends:
Replacement: anti roll bar links – Mazda 3 BK. After applying the spray, wait a few minutes.
Step 17
Install the wheel.
AUTODOC recommends:
Important! Hold the wheel while screwing in the fastening bolts. Mazda 3 BK
Step 18
Screw in the wheel bolts. Use wheel impact socket #19.
Step 19
Lower the car and working in a cross order, tighten the wheel bolts. Use wheel impact socket #19. Use a torque wrench. Tighten it to 118 nm torque.
Step 20
Remove the jacks and chocks.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the MAZDA 3 Saloon (BK) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your MAZDA 3 Saloon (BK)
View more
How to easily repair a punctured tyre | AUTODOC tips
How to remove rust | AUTODOC tips
How to polish an old engine valve cover to a shiny finish | AUTODOC Tips