
Disclaimer
How to change spark plugs on FIAT DUCATO Bus (244, Z_) – replacement guide
downloads:
1
Views:
17

Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
FIAT DUCATO Bus (244, Z_) 2.0 LPG, FIAT DUCATO Bus (244, Z_) 2.0 4x4, FIAT DUCATO Bus (244, Z_) 2.0 Bipower, FIAT DUCATO Bus (244, Z_) 2.0 … View more
The steps may slightly vary depending on the car design.
FIAT DUCATO Bus (244, Z_) 2.0 LPG, FIAT DUCATO Bus (244, Z_) 2.0 4x4, FIAT DUCATO Bus (244, Z_) 2.0 Bipower, FIAT DUCATO Bus (244, Z_) 2.0 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for DUCATO Bus (244, Z_) and other FIAT models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Drive socket # 10
Drive socket # 16
Spark plug socket # 16
Ratchet wrench
Torque wrench
Crow bar
Flat Screwdriver
Microfibre towel
Fender cover
Replacement: spark plugs – FIAT DUCATO Bus (244, Z_). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – FIAT DUCATO Bus (244, Z_). Take the following steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Unscrew the filter housing fastening bolts. Use a drive socket #10. Use a ratchet wrench.
- Step 4Remove the air filter housing retaining spring.
- Step 5Remove the air filter housing.
- Step 6Cover the throttle body with a microfibre towel to prevent dust and dirt from getting into the system.
- Step 7Detach the crankcase ventilation hose from the engine cover at the left. Use a crowbar.
- Step 8Detach the throttle valve connectors. Use a crowbar.
- Step 9Remove the spark plug wire connectors from the spark plug wells.Replacement: spark plugs – FIAT DUCATO Bus (244, Z_). AUTODOC recommends:Be careful to avoid damaging spark plug wires.Remember the sequence of the spark plug wires connectors.
- Step 10Clean dirt, dust and debris from inside the spark plug wells.
- Step 11Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 12Take out the spark plugs. Use the spark plug socket #16.
- Step 13Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 14Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 15Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 27 nm torque.Replacement: spark plugs – FIAT DUCATO Bus (244, Z_). Professionals recommend:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
- Step 16Treat the spark plug wire connectors. Use high-temperature grease. Use a flat screwdriver.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the FIAT Ducato II Minibus (244) model
Popular maintenance tutorials for Fiat Ducato 244
Complete guides for changing the Engine spark plug on different FIAT DUCATO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your FIAT DUCATO Bus (244, Z_)
View more
- The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
- Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
- How to unlock your car without a key | AUTODOC tips
- Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
Most commonly replaced car parts on FIAT DUCATO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME