Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Step 12
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
Step 13
Tighten the fasteners of the ignition coils. Use Torx T30. Use a torque wrench. Tighten it to 12 Nm torque.
Step 14
Plug in the connectors of the ignition coils.
Step 15
Run the engine for a few minutes. This is necessary in order to make sure that the component operates properly.
Step 16
Shut off the engine.
Step 17
Remove the fender protection cover.
Step 18
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the DODGE Caliber Hatchback model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your DODGE Caliber Hatchback
View more
Headlight Restoration | AUTODOC tips
5 common car washing mistakes | AUTODOC tips
Checking the starter without removing it | AUTODOC tips
How to remove scratches from car plastic | AUTODOC tips