Disclaimer
How to change spark plugs on ALFA ROMEO SPIDER (916S_) – replacement guide
downloads:
3
Views:
60
Recommended replacement interval for the part category Spark plug : 100000 km
Important!
This replacement procedure can be used for:
ALFA ROMEO SPIDER (916S_) 2.0 JTS (916SXA00), ALFA ROMEO SPIDER (916S_) 2.0 T.SPARK 16V (916S2B), ALFA ROMEO SPIDER (916S_) 1.8 16V (916S3), ALFA ROMEO SPIDER (916S_) 2.0 T.SPARK 16V (916S2C00) … View more
The steps may slightly vary depending on the car design.
ALFA ROMEO SPIDER (916S_) 2.0 JTS (916SXA00), ALFA ROMEO SPIDER (916S_) 2.0 T.SPARK 16V (916S2B), ALFA ROMEO SPIDER (916S_) 1.8 16V (916S3), ALFA ROMEO SPIDER (916S_) 2.0 T.SPARK 16V (916S2C00) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for SPIDER (916S_) and other ALFA ROMEO models
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Torque wrench
Spark plug socket # 16
Torx bit T40
Ratchet wrench
Fender cover
Replacement: spark plugs – ALFA ROMEO SPIDER (916S_). Tip from AUTODOC:
- The replacement procedure is the same for all spark plugs.
- All work should be done with the engine stopped.
Replacement: spark plugs – ALFA ROMEO SPIDER (916S_). Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Unscrew the engine cover fastener. Use Torx T40. Use a ratchet wrench. - Step 4
Unscrew the oil filler plug. - Step 5
Remove the oil filler cap. - Step 6
Remove the engine cover.AUTODOC recommends:Replacement: spark plugs – ALFA ROMEO SPIDER (916S_). Do not use excessive force when removing the part as this may damage it. - Step 7
Install the oil filler cap. - Step 8
Tighten the oil filler cap. - Step 9
Unplug the connectors from the ignition coils. - Step 10
Unscrew the ignition coil bracket. Use Torx T40. Use a ratchet wrench. - Step 11
Take out the ignition coil from the spark plug well. - Step 12
Clean dirt, dust and debris from inside the spark plug wells. - Step 13
Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench. - Step 14
Take out the spark plugs. - Step 15
Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs. - Step 16
Install the new spark plugs into their mounting seats. - Step 17
Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 24 nm torque.Replacement: spark plugs – ALFA ROMEO SPIDER (916S_). Tip from AUTODOC:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection. - Step 18
Install the ignition coils to the spark plug wells. Make sure you hear a click indicating that it is locked in place.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the ALFA ROMEO Spider (916, 916S) model
Popular maintenance tutorials for Alfa Romeo Spider 916
Complete guides for changing the Engine spark plug on different ALFA ROMEO SPIDER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your ALFA ROMEO SPIDER (916S_)
View more
5 reasons why your car is making a knocking sound
The most common problems when buying a used car | AUTODOC
Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
Most commonly replaced car parts on ALFA ROMEO SPIDER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























