When to replace the Poly V-Belt on your SEAT TOLEDO
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
SEAT Toledo IV Hatchback (KG3) 1.6 TDI, SEAT Toledo IV Hatchback (KG3) 1.6 TDI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Poly V-Belt for Toledo IV Hatchback (KG3) and other SEAT models
Alternative products
How to change Serpentine belt on Seat Toledo 4 1.6 TDI – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – SEAT TOLEDO IV (KG3). List of the tools you'll need:
Torque wrench
Combination spanner #16
Wheel impact socket #17
Fender cover
Wheel chock
Replacement: serpentine belt – SEAT TOLEDO IV (KG3). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
    Step 5
    Lift the car using a jack or place it over an inspection pit.
    Step 6
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. SEAT TOLEDO IV (KG3)
    Step 7
    Remove the wheel.
    Step 8
    How to change Poly V-Belt on Seat Toledo 4 2012 - free PDF and video manuals
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
  2. Step 9
    How to replace SEAT Toledo IV Hatchback (KG3) 1.6 TDI 2013 Poly V-Belt - step-by-step manuals and video guides
    Remove the V-ribbed belt.
  3. Step 10
    Return the tensioner pulley to its initial position. Use a combination spanner #16.
    Replacement: serpentine belt – SEAT TOLEDO IV (KG3). Professionals recommend:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
    Step 11
    Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
    Step 12
    Seat Toledo 4 1.6 (CFNA) 2014 Poly V-Belt replacement: free workshop manuals
    Install the V-ribbed belt.
    Replacement: serpentine belt – SEAT TOLEDO IV (KG3). Tip:
    Make sure that the V-ribbed belt fits all pulleys snugly.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the SEAT Toledo IV Hatchback (KG3) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY SEAT Toledo IV Hatchback (KG3) Poly V-Belt replacement - online guide
Tips & tricks for your SEAT Toledo IV Hatchback (KG3)
View more
  • How to change Alternator belt on SEAT Toledo IV Hatchback (KG3) 1.2 TSI - replacement tricks
    Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
  • Changing Auxiliary belt Seat Toledo 4 1.6 TDI - Replacement Tips
    What to do if your check engine light is on | AUTODOC tips
  • Maintenance Hacks - SEAT Toledo IV Hatchback (KG3) 1.6 (CFNA) Poly V-belt replacement guide
    When, why, and how to change engine oil | AUTODOC tips
  • Replace Drive belt on Seat Toledo 4 - free video tips
    DIY starter repair | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
SEAT Toledo IV Hatchback (KG3) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME