Disclaimer
How to change serpentine belt on RENAULT Scénic III (JZ0/1_) – replacement guide
downloads:
42
Views:
820
Recommended replacement interval for the part category Serpentine belt : 6 year / 160000 km
Important!
This replacement procedure can be used for:
RENAULT Scénic III (JZ0/1_) 1.9 dCi (JZ0J, JZ1J, JZ1K, JZ1S) … View more
The steps may slightly vary depending on the car design.
RENAULT Scénic III (JZ0/1_) 1.9 dCi (JZ0J, JZ1J, JZ1K, JZ1S) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Scénic III (JZ0/1_) and other RENAULT models
Alternative products

Wire brush
Copper grease
Drive socket # 13
Drive socket # 16
Torx bit T25
Wheel impact socket #19
Ratchet wrench
Tap wrench
Ear clamp pliers
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT SCÉNIC III (JZ0/1_). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT SCÉNIC III (JZ0/1_). Take the following steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 5Lift the car using a jack or place it over an inspection pit.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT SCÉNIC III (JZ0/1_) - Step 7
Remove the wheel. - Step 8
Unscrew and remove the wheel arch cover fasteners. Use ear clamp pliers. Use Torx T25. Use a ratchet wrench. - Step 9
Remove the wheel arch cover. - Step 10
Unscrew the fasteners connecting the bumper reinforcement bar to the subframe. Use a drive socket #13. - Step 11
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench. - Step 12
Remove the V-ribbed belt. - Step 13Return the tensioner pulley to its initial position.Replacement: serpentine belt – RENAULT SCÉNIC III (JZ0/1_). AUTODOC experts recommend:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 14
Install the V-ribbed belt.Replacement: serpentine belt – RENAULT SCÉNIC III (JZ0/1_). Tip from AUTODOC:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 15
Pull aside the V-ribbed belt tensioner pulley. Use a drive socket #16. Use a tap wrench.
Comments –
2
- s.t.17.02.2024 19:23MemberBuy far the best auto parts company out there many thanks
@Jessica_L19.02.2024 07:58ModeratorThank you for your feedback! We're glad you like our work.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Scénic III (JZ0/1_) model
Popular maintenance tutorials for Renault Scenic 3
Complete guides for changing the Alternator belt on different RENAULT SCÉNIC models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Scénic III (JZ0/1_)
View more
How to Use Sandblasting Equipment: Step-by-Step Guide | AUTODOC Tips
How to fix your car with AUTODOC CLUB
#DIY Tips for Fixing Your Car's Air Conditioning Issues | Don't Wait for Costly Repairs!
Why Checking Your Oil is Crucial for Engine Performance
Most commonly replaced car parts on RENAULT SCÉNIC
Time to replace parts? Get even better deals in our Shop app.

SCAN ME


























