Disclaimer
How to change serpentine belt on RENAULT Sandero / Stepway II (B8_) – replacement guide
downloads:
49
Views:
1075
Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
RENAULT Sandero / Stepway II (B8_) 1.6, RENAULT Sandero / Stepway II (B8_) 1.5 dCi, RENAULT Sandero / Stepway II (B8_) 1.6 … View more
The steps may slightly vary depending on the car design.
RENAULT Sandero / Stepway II (B8_) 1.6, RENAULT Sandero / Stepway II (B8_) 1.5 dCi, RENAULT Sandero / Stepway II (B8_) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Sandero / Stepway II (B8_) and other RENAULT models
Alternative products

Torque wrench
Combination spanner #10
Combination spanner #16
Drive socket # 13
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Fender cover
Wheel chock
Replacement: serpentine belt – RENAULT SANDERO/STEPWAY II. AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – RENAULT SANDERO/STEPWAY II. Use the following procedure:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Secure the wheels with chocks. - Step 4
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 5Raise the front of the car and secure on supports.Step 6
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. RENAULT SANDERO/STEPWAY II - Step 7
Remove the wheel. - Step 8
Remove the wheel arch cover. Use a clip removal tool. - Step 9
Unscrew the fuel filter bracket fixing bolts. Use a drive socket #13. Use a ratchet wrench. - Step 10
Remove the fuel filter fastening bracket. - Step 11
Unscrew the fuel filter bracket fixing bolts. Use a combination spanner #10. - Step 12
Remove the fuel filter fastening bracket. - Step 13
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 14
Remove the V-ribbed belt. - Step 15Return the tensioner pulley to its initial position.Replacement: serpentine belt – RENAULT SANDERO/STEPWAY II. Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.Step 16
Install the V-ribbed belt.AUTODOC recommends:Make sure that the V-ribbed belt fits all pulleys snugly. - Step 17
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16. - Step 18
Place the V-ribbed belt on the tensioner pulley. - Step 19
Return the tensioner pulley to its initial position.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Sandero / Stepway II (B8_) model
Popular maintenance tutorials for Renault Sandero Stepway 2
Complete guides for changing the Alternator belt on different RENAULT SANDERO / STEPWAY models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT Sandero / Stepway II (B8_)
View more
Top 5 brake repair mistakes | AUTODOC tips
How to Fix P0401 ✅ error code Insufficient EGR flow
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
Engine Overheating? Replace Your Cooling Fan to Fix It
Most commonly replaced car parts on RENAULT SANDERO / STEPWAY
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






























