How to change serpentine belt on HONDA CR-Z (ZF) – replacement guide
HONDA CR-Z (ZF) 1.5 IMA (ZF1), HONDA CR-Z (ZF) 1.5 IMA (ZF2), HONDA CR-Z (ZF) 1.5 IMA (ZF1) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle

- All work should be done with the engine stopped.
- Step 1
Open the bonnet.
Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3Lift the car using a jack or place it over an inspection pit.
Step 4
Undo the fasteners of the oil pan lower cover. Use a Phillips screwdriver. Use a clip removal tool.
- Step 5

Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool.
- Step 6

Remove the wheel arch cover.
- Step 7

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
- Step 8

Remove the V-ribbed belt.
Replacement: serpentine belt – HONDA CR-Z (ZF1). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 9

Return the tensioner pulley to its initial position.
- Step 10

Install the V-ribbed belt.
Replacement: serpentine belt – HONDA CR-Z (ZF1). Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 11

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
- Step 12

Place the V-ribbed belt on the tensioner pulley.
Find out which tyre and wheel sizes are compatible with the HONDA CR-Z (ZF) model
Popular maintenance tutorials for Honda CRZ ZF
Complete guides for changing the Alternator belt on different HONDA CR-Z models
Track expenses, manage logs, schedule replacements, and more.
Save Money on Fuel with These Easy Tips | AUTODOC
5 Essential Tips to Prepare Your Car for Winter | AUTODOC tips
What diagnoses your car?
Discover the 4 Key Reasons Your CHECK ENGINE Light Could Be On | AUTODOC Tips
Most commonly replaced car parts on HONDA CR-Z





















