Recommended replacement interval for the part category V-Ribbed Belt Set : 30000 km

Important!

This replacement procedure can be used for:
HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_) 1.3 HYBRID (GP1), HONDA INSIGHT (ZE_) 1.3 Hybrid (ZE28, ZE2)

The steps may slightly vary depending on the car design.

How to change serpentine belt / v-ribbed belt on HONDA INSIGHT 2 (ZE) [TUTORIAL AUTODOC]

Replacement: serpentine belt – Honda Insight ZE2_ZE3. Tools you'll need:

                        Combination spanner #14
                      
                        Clip removal tool
                      
                        Phillips screwdriver
                      
                        Fender cover

All the parts you need to replace – Poly V-Belt for INSIGHT (ZE_) and other HONDA models

HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_) 1.3 HYBRID (GP1)

HONDA INSIGHT (ZE_) 1.3 Hybrid (ZE28, ZE2)

HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_) 1.3 HYBRID (GP1)

HONDA INSIGHT (ZE_) 1.3 Hybrid (ZE28, ZE2)

Replacement: serpentine belt – Honda Insight ZE2_ZE3. AUTODOC experts recommend:

All work should be done with the engine stopped.

Replacement: serpentine belt – Honda Insight ZE2_ZE3. Use the following procedure:

Step 1

Open the bonnet.
Step 2

Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3

Lift the car using a jack or place it over an inspection pit.
Step 4

Undo the fasteners of the oil pan lower cover.Use a Phillips screwdriver.Use a clip removal tool.
Step 5

Unscrew and remove the wheel arch cover fasteners.Use a clip removal tool.
Step 6

Remove the wheel arch cover.
Step 7

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
Step 8

Remove the V-ribbed belt.

Replacement: serpentine belt – Honda Insight ZE2_ZE3. AUTODOC recommends:

Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
Step 9

Return the tensioner pulley to its initial position.
Step 10

Install the V-ribbed belt.

Replacement: serpentine belt – Honda Insight ZE2_ZE3. Professionals recommend:

Make sure that the V-ribbed belt fits all pulleys snugly.
Step 11

Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
Step 12

Place the V-ribbed belt on the tensioner pulley.
Step 13

Return the tensioner pulley to its initial position. Use a combination spanner #14.
Step 14

Run the engine for a few minutes.This is necessary in order to make sure that the component operates properly.
Step 15

Shut off the engine.
Step 16

Install the wheel arch cover to its mounting seat.
Step 17

Install and tighten the wheel arch cover fasteners.
Step 18

Tighten the fasteners of the oil pan lower cover.Use a Phillips screwdriver.
Step 19

Lower the car.
Step 20

Remove the fender protection cover.
Step 21

Close the hood.

Was this manual helpful?

Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.

How to change: Honda Insight ZE2_ZE3 spark plugs – replacement guide

Free download PDF

5.23 MB
How to change: Honda Insight ZE2_ZE3 engine oil and filter – replacement guide

Free download PDF

7.17 MB
How to change: Honda Insight ZE2_ZE3 front windshield wipers – replacement guide

Free download PDF

2.31 MB
How to change rear brake pads on Honda Insight ZE2_ZE3 – replacement guide

Free download PDF

5.88 MB
How to change front brake pads on Honda Insight ZE2_ZE3 – replacement guide

Free download PDF

6.48 MB
How to change: Honda Insight ZE2_ZE3 pollen filter – replacement guide

Free download PDF

2.98 MB
How to change: Honda Insight ZE2_ZE3 air filter – replacement guide

Free download PDF

4.59 MB
How to change front brake discs on Honda Insight ZE2_ZE3 – replacement guide

Free download PDF

8.59 MB
How to change front lower arm on Honda Insight ZE2_ZE3 – replacement guide

Free download PDF

10.87 MB

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!

Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.

Scan

To download the app:

- scan the QR code
- download from App Store
- download from Google Play

Tips & tricks for your HONDA INSIGHT (ZE_)

How to remove a broken bolt without welding | AUTODOC tips

260K views

Published on: 11/03/2020
Noise from under the hood | AUTODOC TIPS

198K views

Published on: 25/08/2019
How to fix a knocking and creaking suspension | AUTODOC

181K views

Published on: 08/09/2019
6 SIGNS OF A BAD FUEL FILTER | AUTODOC

163K views

Published on: 24/07/2019