
Disclaimer
How to change serpentine belt on HONDA Jazz Hatchback (GE, GG, GP, ZA) – replacement guide
downloads:
26
Views:
796

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_) 1.3 HYBRID (GP1) … View more
The steps may slightly vary depending on the car design.
HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_) 1.3 HYBRID (GP1) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Jazz III Hatchback (GE_, GG_, GP_, ZA_) and other HONDA models
Serpentine belt
Alternative products

Combination spanner #14
Clip removal tool
Phillips screwdriver
Fender cover
Replacement: serpentine belt – HONDA JAZZ III (GE). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: serpentine belt – HONDA JAZZ III (GE). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Undo the fasteners of the oil pan lower cover. Use a Phillips screwdriver. Use a clip removal tool.
- Step 5Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool.
- Step 6Remove the wheel arch cover.
- Step 7Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
- Step 8Remove the V-ribbed belt.Replacement: serpentine belt – HONDA JAZZ III (GE). AUTODOC recommends:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 9Return the tensioner pulley to its initial position.
- Step 10Install the V-ribbed belt.Replacement: serpentine belt – HONDA JAZZ III (GE). Professionals recommend:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 11Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #14.
- Step 12Place the V-ribbed belt on the tensioner pulley.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the HONDA Jazz Hatchback (GE, GG, GP, ZA) model
Popular maintenance tutorials for Honda Jazz GE
Complete guides for changing the Alternator belt on different HONDA JAZZ models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your HONDA Jazz III Hatchback (GE_, GG_, GP_, ZA_)
View more
- How to repair a bumper yourself | AUTODOC tips
- How to unlock your car without a key | AUTODOC tips
- Top 4 Car Cleaning Products to Protect Your Car's Body | AUTODOC Tips
- When, why, and how to change engine oil | AUTODOC tips
Most commonly replaced car parts on HONDA JAZZ
Time to replace parts? Get even better deals in our Shop app.

SCAN ME