
Disclaimer
How to change serpentine belt on AUDI Q3 (8UB, 8UG) – replacement guide
downloads:
31
Views:
536

Recommended replacement interval for the part category Serpentine belt : 30000 km
Important!
This replacement procedure can be used for:
AUDI Q3 (8UB, 8UG) 2.0 TFSI, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro … View more
The steps may slightly vary depending on the car design.
AUDI Q3 (8UB, 8UG) 2.0 TFSI, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Poly V-Belt for Q3 (8UB, 8UG) and other AUDI models
Serpentine belt
Alternative products

Combination spanner #16
Fender cover
Replacement: serpentine belt – AUDI Q3 (8U). AUTODOC recommends:
- All work should be done with the engine stopped.
Replacement: serpentine belt – AUDI Q3 (8U). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
- Step 5Remove the V-ribbed belt.Replacement: serpentine belt – AUDI Q3 (8U). Tip:Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
- Step 6Return the tensioner pulley to its initial position. Use a combination spanner #16.
- Step 7Install the V-ribbed belt.Replacement: serpentine belt – AUDI Q3 (8U). AUTODOC experts recommend:Make sure that the V-ribbed belt fits all pulleys snugly.
- Step 8Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI Q3 (8UB, 8UG) model
Popular maintenance tutorials for Audi Q3 8u
Complete guides for changing the Alternator belt on different AUDI Q3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI Q3 (8UB, 8UG)
View more
- How to repair a bumper yourself | AUTODOC tips
- How to inspect and troubleshoot your car heater when it’s not working
- Why Is the Windscreen Washer Not Spraying? Solution
- Top 5 brake repair mistakes | AUTODOC tips
Most commonly replaced car parts on AUDI Q3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME