Disclaimer
How to change ignition coil on AUDI Q3 (8UB, 8UG) – replacement guide
downloads:
7
Views:
86
Important!
This replacement procedure can be used for:
AUDI Q3 (8UB, 8UG) RS performance 2.5 quattro, AUDI Q3 (8UB, 8UG) RS 2.5 quattro, AUDI Q3 (8UB, 8UG) RS 2.5 quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro … View more
The steps may slightly vary depending on the car design.
AUDI Q3 (8UB, 8UG) RS performance 2.5 quattro, AUDI Q3 (8UB, 8UG) RS 2.5 quattro, AUDI Q3 (8UB, 8UG) RS 2.5 quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro, AUDI Q3 (8UB, 8UG) 2.0 TFSI quattro … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Ignition Coil for Q3 (8UB, 8UG) and other AUDI models
Alternative products

High-temperature anti-seize lubricant
Electronic spray
Flat screwdriver
Crow bar
Fender cover
Replacement: ignition coil – AUDI Q3 (8U). AUTODOC experts recommend:
- The replacement procedure is the same for the ignition coils of all cylinders.
- All work should be done with the engine stopped.
Replacement: ignition coil – AUDI Q3 (8U). Recommended sequence of steps:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Remove the engine cover. - Step 4
Unplug the connectors from the ignition coils. - Step 5
Raise a little the wiring of the ignition coils and move it aside. - Step 6
Pry up the ignition coil. Use a crowbar. - Step 7
Take out the ignition coil from the spark plug well. - Step 8
Treat the ignition coil tip. Use high-temperature grease. Use a flat screwdriver. - Step 9
Install the new ignition coil to the spark plug well. Make sure you hear a click indicating that it is locked in place. - Step 10
Treat the ignition coil connector with electronic spray. The spray will protect the electrical contacts from corrosion, oxidation, and will reduce the contact resistance.Replacement: ignition coil – AUDI Q3 (8U). AUTODOC recommends:After applying the spray, wait a few minutes.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI Q3 (8UB, 8UG) model
Popular maintenance tutorials for Audi Q3 8u
Complete guides for changing the Coil pack on different AUDI Q3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI Q3 (8UB, 8UG)
View more
Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
The Ultimate Guide to Engine Bay Cleaning | AUTODOC
DIY manual gearbox restoration | Drivetrain restoration – Part 3
How to remove scratches from car plastic | AUTODOC tips
Most commonly replaced car parts on AUDI Q3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME























