How to carry out replacement: Engine Mount 1.6 16V Zafira A
Disclaimer
Change Zafira A 2.2 16V Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on VAUXHALL Zafira Mk I (A) (T98) – replacement guide

downloads: 3
Views: 76
Download your free tutorial and fix VAUXHALL Zafira Mk I (A) (T98) 2.0 DI 16V problems yourself Download for free 2.05 MB Engine Mount for Zafira A Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
VAUXHALL Zafira Mk I (A) (T98) 1.8 Dualfuel, VAUXHALL Zafira Mk I (A) (T98) 1.6 16V, VAUXHALL Zafira Mk I (A) (T98) 1.8 16V, VAUXHALL Zafira Mk I (A) (T98) 1.8 16V, VAUXHALL Zafira Mk I (A) (T98) 1.6 CNG, VAUXHALL Zafira Mk I (A) (T98) 1.6 Dualfuel … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for Zafira Mk I (A) (T98) and other VAUXHALL models
Alternative products
How to change Engine mount on Zafira A 1.6 16V – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). Tools you need:
Wire brush
WD-40 spray
Drive socket # 7
Drive socket # 12
Drive socket # E20
Torx bit T30
Torx bit T55
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Jack
Vice
Microfibre towel
Fender cover
Wheel chock
Buy tools
Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). AUTODOC recommends:
  • All work should be done with the engine stopped.
Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). Use the following procedure:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Zafira A 1998 - free PDF and video manuals
    Detach the air intake hose clamp. Use a drive socket #7. Use a ratchet wrench.
  2. Step 4
    How to replace VAUXHALL Zafira Mk I (A) (T98) 1.6 16V 1999 Engine Mount - step-by-step manuals and video guides
    Disconnect the air intake pipe from the air filter housing.
  3. Step 5
    Zafira A 2.0 DTI 16V 2000 Engine Mount replacement: free workshop manuals
    Cover the air intake hose with a microfibre towel to prevent dust and dirt from getting into the system.
  4. Step 6
    Changing Engine Mount on VAUXHALL Zafira Mk I (A) (T98) 2.0 GSI Turbo 2001 by yourself
    Detach the fasteners connecting the air pipe and the wiring harness to the air filter housing.
  5. Step 7
    How to remove VAUXHALL ZAFIRA 1.6 CNG 2002 Engine Mount - online easy-to-follow instructions
    Take off the filter lid. Remove the filter element from the filter housing.
  6. Step 8
    How to replace Engine Mount on VAUXHALL Zafira Mk I (A) (T98) 2003: download PDF manuals and video instructions
    Unscrew the filter housing fastening bolts. Use Torx T30. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Engine Mount replacement on Zafira A 1.8 Dualfuel 2004 - download illustrated guide
    Remove the air filter housing.
  8. Step 10
    Lift the car using a jack or place it over an inspection pit.
    Step 11
    Need to know how to renew Engine Mount on VAUXHALL ZAFIRA 2005? This free workshop manual will help you to do it yourself
    Support the engine skid plate. Use a hydraulic transmission jack.
  9. Step 12
    Changing of Engine Mount on Zafira A 1998 won't be an issue if you follow this illustrated step-by-step guide
    Undo the fasteners of the oil pan lower cover. Use a drive socket #12.
    Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). Tip from AUTODOC experts:
    To avoid injury, hold the engine skid plate cautiously tight when unscrewing the fasteners and when lowering the hydraulic transmission jack.
  10. Step 13
    VAUXHALL ZAFIRA 2.2 16V Engine Mount replacement: online guides and video tutorials
    Remove the hydraulic transmission jack. Remove the oil pan cover.
    AUTODOC recommends:
    Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). Lower the transmission jack smoothly, without jerks, to avoid damaging components and mechanisms.
  11. Step 14
    Lower the car.
    Step 15
    Replacing Engine Mount on Zafira A 2000 1.6 16V by yourself
    Support the engine in the oil pan area. Use a jack.
    Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). AUTODOC experts recommend:
    Make sure that the engine is supported.
  12. Step 16
    Zafira Mk I (A) (T98) 1.6 CNG 2001 Engine Mount DIY replacement workshop manual
    Unscrew the engine mount fasteners (6 pieces). Use a drive socket #E20. Use a ratchet wrench.
  13. Step 17
    How to change Engine Mount on VAUXHALL Zafira Mk I (A) (T98) 2002 - tips and tricks
    Remove the engine mount.
    Replacement: engine mounts – VAUXHALL ZAFIRA Mk I (A) (F75). Tip:
    Carefully check the other engine mounts and replace them if necessary.
  14. Step 18
    Step-by-step recommendations for DIY replacement Zafira A 2003 1.6 CNG Engine Mount
    Grip the bracket with the engine mount in a vice.
  15. Step 19
    DIY replacement of Engine Mount on VAUXHALL Zafira Mk I (A) (T98) 1.8 16V 2004 is not an issue anymore with our step-by-step tutorial
    Unscrew the engine mount from the bracket. Use Torx T55. Use a ratchet wrench.
  16. Step 20
    How to change Engine Mount on Zafira A 1998 - free PDF and video manuals
    Screw the new engine mount to the bracket. Use Torx T55. Use a ratchet wrench.
  17. Step 21
    How to replace VAUXHALL Zafira Mk I (A) (T98) 1.6 16V 1999 Engine Mount - step-by-step manuals and video guides
    Remove the bracket with the engine mount from the vice.
  18. Step 22
    Zafira A 2.0 DTI 16V 2000 Engine Mount replacement: free workshop manuals
    Clean the mounting seat of the engine mount. Use WD-40 spray.
  19. Step 23
    Changing Engine Mount on VAUXHALL Zafira Mk I (A) (T98) 2.0 GSI Turbo 2001 by yourself
    Install the engine mount to its mounting seat.
  20. Step 24
    How to remove VAUXHALL ZAFIRA 1.6 CNG 2002 Engine Mount - online easy-to-follow instructions
    Screw in the engine mount fasteners (6 pieces). Use a drive socket #E20. Use a torque wrench. Tighten it to 55 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VAUXHALL Zafira Mk1 (A) (T98) model

Zafira A tyre size

Popular maintenance tutorials for Zafira A

More manuals for Zafira A

Complete guides for changing the Engine mounts on different VAUXHALL ZAFIRA models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VAUXHALL Zafira Mk I (A) (T98) Engine Mount replacement - online guide
Tips & tricks for your VAUXHALL Zafira Mk I (A) (T98)
View more
  • How to change Engine mounts on VAUXHALL Zafira Mk I (A) (T98) 1.8 16V - replacement tricks
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
    9K views
    Published on: 08/12/2020
  • Changing Engine mounting Zafira A 1.6 16V - Replacement Tips
    Which Coolant is Best? Comparison Test | AUTODOC
    9K views
    Published on: 13/10/2022
  • Maintenance Hacks - VAUXHALL Zafira Mk I (A) (T98) 2.0 DTI 16V Motor mounts replacement guide
    5 signs of a faulty strut mount and how to fix it
    8K views
    Published on: 28/08/2025
  • Replace Motor mount on Zafira A - free video tips
    Revive Your Vehicle's Look | How to Restore Wheel Rims Yourself!
    7K views
    Published on: 13/05/2021

Most commonly replaced car parts on VAUXHALL ZAFIRA

Professional manuals for the most common VAUXHALL models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VAUXHALL Zafira Mk I (A) (T98) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME