
Disclaimer
How to change right engine mounts on CITROËN C8 (EA_, EB_) – replacement guide
downloads:
2
Views:
42
Important!
This replacement procedure can be used for:
CITROËN C8 II 2.0, CITROËN C8 II 2.2, CITROËN C8 II 2.0 HDi, CITROËN C8 II 2.2 HDi, CITROËN C8 II 2.0 16V, CITROËN C8 II 2.0 HDi, CITROËN C8 II 2.0 HDi, CITROËN C8 II 2.0 HDi … View more
The steps may slightly vary depending on the car design.
CITROËN C8 II 2.0, CITROËN C8 II 2.2, CITROËN C8 II 2.0 HDi, CITROËN C8 II 2.2 HDi, CITROËN C8 II 2.0 16V, CITROËN C8 II 2.0 HDi, CITROËN C8 II 2.0 HDi, CITROËN C8 II 2.0 HDi … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for C8 II and other CITROËN models
Engine mount
Alternative products

Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – CITROËN C8 (EA_, EB_). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – CITROËN C8 (EA_, EB_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Release the coolant reservoir retainers. Use a clip removal tool.
- Step 4Remove the coolant reservoir cap.
- Step 5Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – CITROËN C8 (EA_, EB_). Do not use excessive force when removing the part as this may damage it.
- Step 6Support the engine in the oil pan area. Use a jack.
- Step 7Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
- Step 9Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
- Step 10Remove the engine mount.Replacement: engine mounts – CITROËN C8 (EA_, EB_). AUTODOC recommends:Carefully check the other engine mounts and replace them if necessary.
- Step 11Remove the fastening bolts.
- Step 12Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
- Step 13Treat the engine mount fasteners. Use a sealant.
- Step 14Install the engine mount to its mounting seat.
- Step 15Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C8 II model
Popular maintenance tutorials for CITROËN C8 (EA_, EB_)
Complete guides for changing the Engine mounts on different CITROËN C8 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C8 II
View more
- The most common problems when buying a used car | AUTODOC
- Top 5 brake repair mistakes | AUTODOC tips
- #DIY Wheel Rim Restoration: Revive Scratches and Chips Easily!
- Petrol or diesel: The engine showdown! | AUTODOC
Most commonly replaced car parts on CITROËN C8
Time to replace parts? Get even better deals in our Shop app.

SCAN ME