
Disclaimer
How to change spark plugs on CITROËN C8 (EA_, EB_) – replacement guide
downloads:
15
Views:
182

Recommended replacement interval for the part category Spark plug : 60000 km
Important!
This replacement procedure can be used for:
CITROËN C8 II 2.2 … View more
The steps may slightly vary depending on the car design.
CITROËN C8 II 2.2 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Spark Plug for C8 II and other CITROËN models
Spark plug
Alternative products

High-temperature anti-seize lubricant
Spark plug socket # 16
Drive socket # 8
Ratchet wrench
Torque wrench
Flat Screwdriver
Telescoping magnet
Fender cover
Replacement: spark plugs – CITROËN C8 (EA_, EB_). AUTODOC experts recommend:
- The replacement procedure is the same for all spark plugs.
- Warning! Shut down the engine before starting any work – CITROËN C8 (EA_, EB_).
Carry out replacement in the following order:
- Step 1Open the hood.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Remove the engine cover clips. Use a flat screwdriver.
- Step 4Remove the engine cover. Use a flat screwdriver.Replacement: spark plugs – CITROËN C8 (EA_, EB_). AUTODOC recommends:Do not apply excessive force when removing the part. Otherwise you may damage it.
- Step 5Detach the connector from the ignition coil. Use a flat screwdriver.
- Step 6Unscrew the ignition coil bolts. Use a drive socket #8. Use a ratchet wrench.
- Step 7Remove the ignition coil by pulling it straight up.
- Step 8Clean dirt, dust and debris from inside the spark plug wells.Step 9Unscrew the spark plugs. Use the spark plug socket #16. Use a ratchet wrench.
- Step 10Take out the spark plugs. Use a telescoping magnet.
- Step 11Apply a thin layer of a special high temperature anti-seize lubricant to the threads of the new spark plugs.
- Step 12Install the new spark plugs into their mounting seats. Use the spark plug socket #16.
- Step 13Screw new spark plugs and tighten them. Use the spark plug socket #16. Use a torque wrench. Tighten it to 25 nm torque.Replacement: spark plugs – CITROËN C8 (EA_, EB_). Tip from AUTODOC experts:Don't tighten the plugs with excessive force. Exceeding tightening torque can damage the thread connection. Be careful when working with a spark plug wrench. Its skewing can cause damage to the threaded connection.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C8 II model
Popular maintenance tutorials for CITROËN C8 (EA_, EB_)
Complete guides for changing the Engine spark plug on different CITROËN C8 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C8 II
View more
- 3 essential tips for choosing summer tyres | Get ready for warmer weather
- #TPMS Explained: Why Your Light is On and How to Respond Safely
- How to choose the right engine oil for your car | AUTODOC
- 5 more brake repair mistakes | Stop making these brake repair mistakes
Most commonly replaced car parts on CITROËN C8
Time to replace parts? Get even better deals in our Shop app.

SCAN ME