How to carry out replacement: Engine Mount 1.4 HDi (SC8HZC, SC8HR0, SC8HP4) Citroën C3 II
Disclaimer
Change Citroën C3 II 1.4 HDi (SC8HZC, SC8HR0, SC8HP4) Engine Mount yourself – manuals and video tutorials

How to change rear engine mounts on CITROËN C3 II (SC_) – replacement guide

downloads: 20
Views: 182
Download your free tutorial and fix CITROËN C3 II (SC_) 1.0 VTi problems yourself Download for free 1.18 MB Engine Mount for Citroën C3 II Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
CITROËN C3 II (SC_) 1.1 BiFuel, CITROËN C3 II (SC_) 1.1 i, CITROËN C3 II (SC_) 1.4, CITROËN C3 II (SC_) 1.4 VTi, CITROËN C3 II (SC_) 1.6 VTi, CITROËN C3 II (SC_) 1.4 HDi (SC8HZC, SC8HR0, SC8HP4), CITROËN C3 II (SC_) 1.4 LPG, CITROËN C3 II (SC_) 1.4 VTi … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for C3 II (SC_) and other CITROËN models
Alternative products
How to change Engine mount on Citroën C3 II 1.4 HDi (SC8HZC, SC8HR0, SC8HP4) – step-by-step instructions for straightforward car repair Engine mount
Tools
Replacement: engine mounts – CITROËN C3 II. Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 16
Ratchet wrench
Crow bar
Hydraulic transmission jack
Fender cover
Buy tools
Replacement: engine mounts – CITROËN C3 II. AUTODOC recommends:
  • All work should be done with the engine stopped.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Engine Mount on Citroën C3 II 2009 - free PDF and video manuals
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  2. Step 5
    How to replace CITROËN C3 II (SC_) 1.4 HDi (SC8HZC, SC8HR0, SC8HP4) 2010 Engine Mount - step-by-step manuals and video guides
    Support the gearbox. Use a hydraulic transmission jack.
    Replacement: engine mounts – CITROËN C3 II. Tip:
    Take care to prevent the gearbox from being unsupported (hanging).
  3. Step 6
    Citroën C3 II 1.6 HDi 2011 Engine Mount replacement: free workshop manuals
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
  4. Step 7
    Changing Engine Mount on CITROËN C3 II (SC_) 1.4 2012 by yourself
    Remove the fastening bolt.
  5. Step 8
    How to remove CITROËN C3 1.1 i 2013 Engine Mount - online easy-to-follow instructions
    Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench.
  6. Step 9
    How to replace Engine Mount on CITROËN C3 II (SC_) 2014: download PDF manuals and video instructions
    Remove the fastening bolt.
  7. Step 10
    How hard is it to do yourself: Engine Mount replacement on Citroën C3 II 1.6 BlueHDi 2015 - download illustrated guide
    Remove the engine mount.
    Replacement: engine mounts – CITROËN C3 II. Professionals recommend:
    Carefully check the other engine mounts and replace them if necessary.
  8. Step 11
    Need to know how to renew Engine Mount on CITROËN C3 2016? This free workshop manual will help you to do it yourself
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  9. Step 12
    Changing of Engine Mount on Citroën C3 II 2017 won't be an issue if you follow this illustrated step-by-step guide
    Install the engine mount to its mounting seat.
  10. Step 13
    CITROËN C3 1.4 HDi (SC8HZC, SC8HR0, SC8HP4) Engine Mount replacement: online guides and video tutorials
    Install the fastening bolts. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN C3 II (SC) model

Citroën C3 II tyre size

Popular maintenance tutorials for Citroën C3 II

More manuals for Citroën C3 II

Complete guides for changing the Engine mounts on different CITROËN C3 models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN C3 II (SC_) Engine Mount replacement - online guide
Tips & tricks for your CITROËN C3 II (SC_)
View more
  • How to change Engine mounts on CITROËN C3 II (SC_) 1.2 VTi - replacement tricks
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
    12K views
    Published on: 13/10/2020
  • Changing Engine mounting Citroën C3 II 1.4 HDi (SC8HZC, SC8HR0, SC8HP4) - Replacement Tips
    2 ways to clean the EGR valve – which one is better?
    32K views
    Published on: 04/09/2025
  • Maintenance Hacks - CITROËN C3 II (SC_) 1.6 HDi Motor mounts replacement guide
    Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
    7K views
    Published on: 20/05/2021
  • Replace Motor mount on Citroën C3 II - free video tips
    How do EGR valves work? | AUTODOC
    23K views
    Published on: 18/07/2020

Most commonly replaced car parts on CITROËN C3

Professional manuals for the most common CITROËN models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN C3 II (SC_) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME