
Disclaimer
How to change rear engine mounts on CITROËN C2 Hatchback (JM) – replacement guide
downloads:
9
Views:
131
Important!
This replacement procedure can be used for:
CITROËN C2 Hatchback (JM) 1.1, CITROËN C2 Hatchback (JM) 1.4, CITROËN C2 Hatchback (JM) 1.6, CITROËN C2 Hatchback (JM) 1.4 HDi, CITROËN C2 Hatchback (JM) 1.6 VTS, CITROËN C2 Hatchback (JM) 1.4 16V, CITROËN C2 Hatchback (JM) 1.6 HDi, CITROËN C2 Hatchback (JM) 1.4 … View more
The steps may slightly vary depending on the car design.
CITROËN C2 Hatchback (JM) 1.1, CITROËN C2 Hatchback (JM) 1.4, CITROËN C2 Hatchback (JM) 1.6, CITROËN C2 Hatchback (JM) 1.4 HDi, CITROËN C2 Hatchback (JM) 1.6 VTS, CITROËN C2 Hatchback (JM) 1.4 16V, CITROËN C2 Hatchback (JM) 1.6 HDi, CITROËN C2 Hatchback (JM) 1.4 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for C2 Hatchback (JM) and other CITROËN models
Engine mount
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 16
Ratchet wrench
Crow bar
Hydraulic transmission jack
Fender cover
Replacement: engine mounts – CITROËN C2 (JM_). AUTODOC recommends:
- All work should be done with the engine stopped.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Lift the car using a jack or place it over an inspection pit.Step 4Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
- Step 5Support the gearbox. Use a hydraulic transmission jack.Replacement: engine mounts – CITROËN C2 (JM_). Tip:Take care to prevent the gearbox from being unsupported (hanging).
- Step 6Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #16. Use a ratchet wrench.
- Step 7Remove the fastening bolt.
- Step 8Unscrew the fastener connecting the engine mount to the gearbox housing. Use a drive socket #16. Use a ratchet wrench.
- Step 9Remove the fastening bolt.
- Step 10Remove the engine mount.Replacement: engine mounts – CITROËN C2 (JM_). Professionals recommend:Carefully check the other engine mounts and replace them if necessary.
- Step 11Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
- Step 12Install the engine mount to its mounting seat.
- Step 13Install the fastening bolts. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN C2 Hatchback (JM) model
Popular maintenance tutorials for Citroen C2 Mk1
Complete guides for changing the Engine mounts on different CITROËN C2 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN C2 Hatchback (JM)
View more
- Don’t Replace, Just Polish! Headlight Restoration with AUTODOC
- TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
- How to unlock your car without a key | AUTODOC tips
- Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
Most commonly replaced car parts on CITROËN C2
Time to replace parts? Get even better deals in our Shop app.

SCAN ME