
Disclaimer
How to change right engine mounts on CITROËN Berlingo / Berlingo First Van (M_) – replacement guide
downloads:
10
Views:
217
Important!
This replacement procedure can be used for:
CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI, CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI … View more
The steps may slightly vary depending on the car design.
CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI, CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for Berlingo / Berlingo First Van (M_) and other CITROËN models
Engine mount
Alternative products

Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Replacement: engine mounts – CITROËN BERLINGO Box (M_). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – CITROËN BERLINGO Box (M_). Recommended sequence of steps:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Release the coolant reservoir retainers. Use a clip removal tool.
- Step 4Remove the coolant reservoir cap.
- Step 5Remove the engine cover.AUTODOC recommends:Replacement: engine mounts – CITROËN BERLINGO Box (M_). Do not use excessive force when removing the part as this may damage it.
- Step 6Support the engine in the oil pan area. Use a jack.
- Step 7Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
- Step 8Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
- Step 9Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
- Step 10Remove the engine mount.Replacement: engine mounts – CITROËN BERLINGO Box (M_). AUTODOC recommends:Carefully check the other engine mounts and replace them if necessary.
- Step 11Remove the fastening bolts.
- Step 12Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
- Step 13Treat the engine mount fasteners. Use a sealant.
- Step 14Install the engine mount to its mounting seat.
- Step 15Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 1
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo / Berlingo First I Van (M) model
Popular maintenance tutorials for Citroën Berlingo M
Complete guides for changing the Engine mounts on different CITROËN BERLINGO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your CITROËN Berlingo / Berlingo First Van (M_)
View more
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- How to remove rust | AUTODOC tips
- Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
- How to repair a bumper yourself | AUTODOC tips
Most commonly replaced car parts on CITROËN BERLINGO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME