How to carry out replacement: Engine Mount 1.6 HDi 90 16V Citroen Berlingo mk2
Disclaimer
Change Citroen Berlingo mk2 1.6 BlueHDi 120 Engine Mount yourself – manuals and video tutorials

How to change right engine mounts on CITROËN BERLINGO Box (B9) – replacement guide

downloads: 1
Views: 49
Download your free tutorial and fix CITROËN BERLINGO Box (B9) 1.6 HDi 110 problems yourself Download for free 1.49 MB Engine Mount for Citroen Berlingo mk2 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
CITROËN BERLINGO Box (B9) 1.6 HDi 75, CITROËN BERLINGO Box (B9) 1.6 HDi 90 16V, CITROËN BERLINGO Box (B9) 1.6 HDi 110 … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Engine Mount for BERLINGO Box (B9) and other CITROËN models
How to change Engine mount on Citroen Berlingo mk2 1.6 HDi 90 16V – step-by-step instructions for straightforward car repair Engine mount
How to change Engine mount on Berlingo II Van (B9) – tips for proper car maintenance
Engine mount for Berlingo II Van (B9) Diesel (75 hp)
Simple DIY car repair steps – Replacing Engine mount on Berlingo II Van (B9)
Engine mount for Berlingo II Van (B9) Diesel (90 hp)
Easy tricks to help you to replace Engine mount on Berlingo II Van (B9)
Engine mount for Berlingo II Van (B9) Diesel (109 hp)
Tools
Replacement: engine mounts – CITROËN BERLINGO Box (B9). Tools you might need:
Wire brush
WD-40 spray
Sealant
Copper grease
Torque wrench
Drive socket # E14
Torx bit T50
Ratchet wrench
Clip removal tool
Jack
Fender cover
Wheel chock
Buy tools
Replacement: engine mounts – CITROËN BERLINGO Box (B9). AUTODOC experts recommend:
  • All work should be done with the engine stopped.
Replacement: engine mounts – CITROËN BERLINGO Box (B9). Recommended sequence of steps:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    How to change Engine Mount on Citroen Berlingo mk2 2008 - free PDF and video manuals
    Release the coolant reservoir retainers. Use a clip removal tool.
  2. Step 4
    How to replace CITROËN BERLINGO Box (B9) 1.6 HDi 90 16V 2009 Engine Mount - step-by-step manuals and video guides
    Remove the coolant reservoir cap.
  3. Step 5
    Citroen Berlingo mk2 1.6 HDi 75 2010 Engine Mount replacement: free workshop manuals
    Remove the engine cover.
    AUTODOC recommends:
    Replacement: engine mounts – CITROËN BERLINGO Box (B9). Do not use excessive force when removing the part as this may damage it.
  4. Step 6
    Changing Engine Mount on CITROËN BERLINGO Box (B9) 1.6 HDi / BlueHDi 75 2011 by yourself
    Support the engine in the oil pan area. Use a jack.
  5. Step 7
    How to remove CITROËN BERLINGO 1.6 BlueHDi 100 2012 Engine Mount - online easy-to-follow instructions
    Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 8
    How to replace Engine Mount on CITROËN BERLINGO Box (B9) 2013: download PDF manuals and video instructions
    Unscrew the fasteners that connect the engine mount to the car body. Use a drive socket #E14. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Engine Mount replacement on Citroen Berlingo mk2 1.6 2014 - download illustrated guide
    Unscrew the engine mount fasteners. Use Torx T50. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Engine Mount on CITROËN BERLINGO 2015? This free workshop manual will help you to do it yourself
    Remove the engine mount.
    Replacement: engine mounts – CITROËN BERLINGO Box (B9). AUTODOC recommends:
    Carefully check the other engine mounts and replace them if necessary.
  9. Step 11
    Changing of Engine Mount on Citroen Berlingo mk2 2016 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolts.
  10. Step 12
    CITROËN BERLINGO 1.6 BlueHDi 120 Engine Mount replacement: online guides and video tutorials
    Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Engine Mount on Citroen Berlingo mk2 2018 1.6 HDi 90 16V by yourself
    Treat the engine mount fasteners. Use a sealant.
  12. Step 14
    BERLINGO Box (B9) 1.6 BlueHDi 100 2019 Engine Mount DIY replacement workshop manual
    Install the engine mount to its mounting seat.
  13. Step 15
    How to change Engine Mount on CITROËN BERLINGO Box (B9) 2020 - tips and tricks
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo II Van (B9) model.

Citroen Berlingo mk2 tyre size

Popular maintenance tutorials for Citroen Berlingo mk2

More manuals for Citroen Berlingo mk2

Complete guides for changing the Engine mounts on different CITROËN BERLINGO models

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
CITROËN BERLINGO Box (B9) Engine Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY CITROËN BERLINGO Box (B9) Engine Mount replacement - online guide
Tips & tricks for your CITROËN BERLINGO Box (B9)
View more
  • How to change Engine mounts on CITROËN BERLINGO Box (B9) 1.6 HDi 90 - replacement tricks
    How to remove scratches from a car | AUTODOC tips
    7K views
    Published on: 12/05/2022
  • Changing Engine mounting Citroen Berlingo mk2 1.6 HDi 90 16V - Replacement Tips
    How to fix your car with AUTODOC CLUB
    16K views
    Published on: 30/11/2021
  • Maintenance Hacks - CITROËN BERLINGO Box (B9) 1.6 HDi 75 Motor mounts replacement guide
    How to polish an old engine valve cover to a shiny finish | AUTODOC Tips
    8K views
    Published on: 30/11/2023
  • Replace Motor mount on Citroen Berlingo mk2 - free video tips
    Top 5 mistakes when buying car parts
    4K views
    Published on: 10/03/2022

Most commonly replaced car parts on CITROËN BERLINGO

Professional manuals for the most common CITROËN models