When to replace the Poly V-Belt on your CITROËN BERLINGO
Recommended replacement interval for the part category Serpentine belt : 1 year / 20000 km
Important!
This replacement procedure can be used for:
CITROËN Berlingo / Berlingo First Van (M_) 1.8 D (MBA9A, MCA9A), CITROËN Berlingo / Berlingo First Van (M_) 1.9 D (MBDJY) View more

The steps may slightly vary depending on the car design.

How to change serpentine belt on CITROËN BERLINGO M [TUTORIAL AUTODOC]

video
All the parts you need to replace – Poly V-Belt for Berlingo / Berlingo First Van (M_) and other CITROËN models
Alternative products
How to change Serpentine belt on Citroën Berlingo M 1.9 D 70 – step-by-step instructions for straightforward car repair Serpentine belt
Tools
Replacement: serpentine belt – Citroën Berlingo M. List of the tools you'll need:
Wire brush
Torque wrench
Drive socket # 27
HEX bit no.H8
1/4" square drive extension bar
Wheel impact socket #19
Ratchet wrench
Clip removal tool
Phillips screwdriver
Fender cover
Wheel chock
Replacement: serpentine belt – Citroën Berlingo M. Tools you might need:
  • All work should be done with the engine stopped.
Replacement: serpentine belt – Citroën Berlingo M. Use the following procedure:
  1. Step 1
    How to change Poly V-Belt on Citroën Berlingo M 1996 - free PDF and video manuals
    Open the hood.
  2. Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Secure the wheels with chocks.
    Step 4
    How to replace CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 70 1997 Poly V-Belt - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 5
    Citroën Berlingo M 2.0 HDI 1998 Poly V-Belt replacement: free workshop manuals
    Raise the car.
    Replacement: serpentine belt – Citroën Berlingo M. AUTODOC recommends:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
  4. Step 6
    Changing Poly V-Belt on CITROËN Berlingo / Berlingo First Van (M_) 1.9 D 1999 by yourself
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. Citroën Berlingo M
  5. Step 7
    How to remove CITROËN BERLINGO 1.4 i 2000 Poly V-Belt - online easy-to-follow instructions
    Remove the wheel.
  6. Step 8
    How to replace Poly V-Belt on CITROËN Berlingo / Berlingo First Van (M_) 2001: download PDF manuals and video instructions
    Unscrew and remove the wheel arch cover fasteners. Use a clip removal tool. Use a Phillips screwdriver.
  7. Step 9
    How hard is it to do yourself: Poly V-Belt replacement on Citroën Berlingo M 1.1 i 2002 - download illustrated guide
    Remove the wheel arch cover.
  8. Step 10
    Need to know how to renew Poly V-Belt on CITROËN BERLINGO 2003? This free workshop manual will help you to do it yourself
    Release the coolant pipe fasteners.
  9. Step 11
    Changing of Poly V-Belt on Citroën Berlingo M 2004 won't be an issue if you follow this illustrated step-by-step guide
    Clean the tensioner pulley fastener. Use a wire brush.
  10. Step 12
    CITROËN BERLINGO 1.6 16V Poly V-Belt replacement: online guides and video tutorials
    Loosen the tensioner pulley fastener. Use HEX No.H8. Use a ratchet wrench.
  11. Step 13
    Replacing Poly V-Belt on Citroën Berlingo M 2006 1.9 D 70 by yourself
    Pull aside the V-ribbed belt tensioner pulley. Use a 1/4" square drive extension bar. Use a ratchet wrench.
  12. Step 14
    Berlingo / Berlingo First Van (M_) 1.4 i 2007 Poly V-Belt DIY replacement workshop manual
    Remove the V-ribbed belt.
    Replacement: serpentine belt – Citroën Berlingo M. Tip from AUTODOC experts:
    Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
  13. Step 15
    How to change Poly V-Belt on CITROËN Berlingo / Berlingo First Van (M_) 2008 - tips and tricks
    Install the V-ribbed belt.
    Replacement: serpentine belt – Citroën Berlingo M. Professionals recommend:
    Make sure that the V-ribbed belt fits all pulleys snugly.
  14. Step 16
    Step-by-step recommendations for DIY replacement Citroën Berlingo M 2009 1.4 i Poly V-Belt
    Tension the belt by turning the tensioner pulley clockwise. Use a 1/4" square drive extension bar. Use a ratchet wrench.
    Replacement: serpentine belt – Citroën Berlingo M. Tip:
    Keep the belt taut until you've tightened the tensioner pulley fastener.
  15. Step 17
    DIY replacement of Poly V-Belt on CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI 2010 is not an issue anymore with our step-by-step tutorial
    Tighten the fastener of the serpentine belt tensioner pulley. Use HEX No.H8. Use a torque wrench. Tighten it to 35 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the CITROËN Berlingo / Berlingo First I Van (M) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY CITROËN Berlingo / Berlingo First Van (M_) Poly V-Belt replacement - online guide
Tips & tricks for your CITROËN Berlingo / Berlingo First Van (M_)
View more
  • How to change Alternator belt on CITROËN Berlingo / Berlingo First Van (M_) 1.6 HDI - replacement tricks
    How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
  • Changing Auxiliary belt Citroën Berlingo M 1.9 D 70 - Replacement Tips
    Why Is the Windscreen Washer Not Spraying? Solution
  • Maintenance Hacks - CITROËN Berlingo / Berlingo First Van (M_) 2.0 HDI Poly V-belt replacement guide
    Top 5 reasons why the suspension knocks | AUTODOC tips
  • Replace Drive belt on Citroën Berlingo M - free video tips
    Transform Your Old Engine Valve Cover: Quick Polishing Tips for a Shiny Finish | AUTODOC Tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
CITROËN Berlingo / Berlingo First Van (M_) Poly V-Belt replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME