
Disclaimer
How to change rear wheel bearing on VW Polo V Hatchback (6R1, 6C1) – replacement guide
downloads:
13
Views:
301
Important!
This replacement procedure can be used for:
VW Polo Hatchback (6R1, 6C1) 1.2, VW Polo Hatchback (6R1, 6C1) 1.2, VW Polo Hatchback (6R1, 6C1) 1.4 (6R1), VW Polo Hatchback (6R1, 6C1) 1.6 TDI, VW Polo Hatchback (6R1, 6C1) 1.6 TDI, VW Polo Hatchback (6R1, 6C1) 1.6 TDI, VW Polo Hatchback (6R1, 6C1) 1.2 TSI, VW Polo Hatchback (6R1, 6C1) 1.2 TDI … View more
The steps may slightly vary depending on the car design.
VW Polo Hatchback (6R1, 6C1) 1.2, VW Polo Hatchback (6R1, 6C1) 1.2, VW Polo Hatchback (6R1, 6C1) 1.4 (6R1), VW Polo Hatchback (6R1, 6C1) 1.6 TDI, VW Polo Hatchback (6R1, 6C1) 1.6 TDI, VW Polo Hatchback (6R1, 6C1) 1.6 TDI, VW Polo Hatchback (6R1, 6C1) 1.2 TSI, VW Polo Hatchback (6R1, 6C1) 1.2 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Wheel Bearing for Polo Hatchback (6R1, 6C1) and other VW models
Wheel bearing kit
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
12-point socket # 30
Wheel impact socket #17
Torque wrench
Tap wrench
Hammer
Rubber mallet
Phillips screwdriver
Crow bar
Wheel chock
Replacement: wheel bearing – VW POLO (6R, 6C). AUTODOC recommends:
- Do not re-use the bearing assembly of your VW POLO (6R, 6C) car.
- The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
- Please note: all work on the car – VW POLO (6R, 6C) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Secure the wheels with chocks.
- Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.Replacement: wheel bearing – VW POLO (6R, 6C). Tip:To avoid injury, hold up the wheel when unscrewing the bolts.
- Step 5Remove the wheel.
- Step 6Clean the brake drum. Use a wire brush. Use WD-40 spray.
- Step 7Unscrew the brake drum fastening. Use a Phillips screwdriver.
- Step 8Remove the brake drum.Replacement: wheel bearing – VW POLO (6R, 6C). AUTODOC experts recommend:Examine the brake drum. Replace it if necessary.
- Step 9Remove the hub bearing protection cap. Use a hammer. Use a crowbar.Replacement: wheel bearing – VW POLO (6R, 6C). Tip from AUTODOC:Some cars are not equipped with wheel hub caps.
- Step 10Unscrew the wheel hub axle nut. Use drive 12-point socket #30. Use a tap wrench.
- Step 11Remove the hub and the bearing together, since they are a sealed unit.
- Step 12Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
- Step 13Install the new wheel hub with a bearing.
- Step 14Tighten the hub. Use drive 12-point socket #30. Use a torque wrench. Tighten it to 175 nm torque.Replacement: wheel bearing – VW POLO (6R, 6C). Professionals recommend:The wheel bearing unit must not tilt on the axle pin.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VW Polo V Hatchback (6R1, 6C1) model
Popular maintenance tutorials for Polo 6R
Complete guides for changing the Wheel bearings on different VW POLO models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VW Polo Hatchback (6R1, 6C1)
View more
- How to restore a steering wheel | AUTODOC tips
- TOP 8 mistakes car owners make | AUTODOC tips
- Top 7 signs of a bad starter
- How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Most commonly replaced car parts on VW POLO
Time to replace parts? Get even better deals in our Shop app.

SCAN ME