Important!
This replacement procedure can be used for:
RENAULT Wind Convertible 1.2 TCe 100 (E4MF), RENAULT Wind Convertible 1.2 (E4MF), RENAULT Wind Convertible 1.6 (E4MB, E4MC) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Wind Convertible and other RENAULT models
Tools
Replacement: wheel bearing – RENAULT WIND (E4M_). Tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Multipurpose grease
Copper grease
Combination spanner №15
Drive socket # 13
Drive socket # E16
Drive socket # 30
Wheel impact socket #19
Ratchet wrench
Torque wrench
Brake caliper wind back tool
Tap wrench
Hammer
Rubber mallet
Crow bar
Wheel chock
Replacement: wheel bearing – RENAULT WIND (E4M_). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your RENAULT WIND (E4M_) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT WIND (E4M_). Recommended sequence of steps:
  1. Step 1
    Open the bonnet. Unscrew the brake fluid reservoir cap.
    Step 2
    How to change Wheel Bearing on RENAULT WIND (E4M_) 2010 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 3
    How to replace RENAULT Wind Convertible 1.2 2011 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #19.
  3. Step 4
    Raise the rear of the car and secure on supports.
    Step 5
    RENAULT WIND (E4M_) 1.2 TCe 100 (E4MF) 2012 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. RENAULT WIND (E4M_)
  4. Step 6
    Changing Wheel Bearing on RENAULT Wind Convertible 1.2 2013 by yourself
    Remove the wheel.
  5. Step 7
    How to remove RENAULT WIND 1.2 TCe 100 (E4MF) 2014 Wheel Bearing - online easy-to-follow instructions
    Spread the brake pads. Use a crowbar.
  6. Step 8
    How to replace Wheel Bearing on RENAULT Wind Convertible 2015: download PDF manuals and video instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on RENAULT WIND (E4M_) 1.2 2016 - download illustrated guide
    Unscrew the brake caliper fastening. Use a combination spanner #15. Use a drive socket #13. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Wheel Bearing on RENAULT WIND 2017? This free workshop manual will help you to do it yourself
    Remove the brake caliper.
    Replacement: wheel bearing – RENAULT WIND (E4M_). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  9. Step 11
    Changing of Wheel Bearing on RENAULT WIND (E4M_) 2018 won't be an issue if you follow this illustrated step-by-step guide
    Remove the brake pads. Use a crowbar.
  10. Step 12
    RENAULT WIND 1.6 Wheel Bearing replacement: online guides and video tutorials
    Clean the brake caliper bracket fasteners. Use WD-40 spray.
  11. Step 13
    Replacing Wheel Bearing on RENAULT WIND (E4M_) 2020 1.2 by yourself
    Unscrew the caliper bracket fastening. Use a drive socket #E16. Use a tap wrench.
  12. Step 14
    Wind Convertible 1.2 TCe 100 (E4MF) 2021 Wheel Bearing DIY replacement workshop manual
    Remove the caliper bracket.
  13. Step 15
    How to change Wheel Bearing on RENAULT Wind Convertible 2022 - tips and tricks
    Pry up and remove the wheel hub cap. Use a crowbar. Use a hammer.
  14. Step 16
    Step-by-step recommendations for DIY replacement RENAULT WIND (E4M_) 2023 1.2 TCe 100 (E4MF) Wheel Bearing
    Unscrew the hub lock nut. Use a drive socket #30. Use a tap wrench.
  15. Step 17
    DIY replacement of Wheel Bearing on RENAULT Wind Convertible 1.6 2024 is not an issue anymore with our step-by-step tutorial
    Remove the brake disc assemled with the wheel hub bearing.
  16. Step 18
    How to change Wheel Bearing on RENAULT WIND (E4M_) 2010 - free PDF and video manuals
    Install the brake disc assembled with the wheel hub bearing.
  17. Step 19
    How to replace RENAULT Wind Convertible 1.2 2011 Wheel Bearing - step-by-step manuals and video guides
    Screw the wheel hub lock nut. Use a drive socket #30. Use a torque wrench. Tighten it to 175 Nm torque.
  18. Step 20
    RENAULT WIND (E4M_) 1.2 TCe 100 (E4MF) 2012 Wheel Bearing replacement: free workshop manuals
    Treat the hub where it contacts the brake disk. Use a multipurpose grease.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Wind Convertible model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
RENAULT Wind Convertible Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY RENAULT Wind Convertible Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT Wind Convertible
View more
  • How to change Wheel bearings on RENAULT Wind Convertible 1.6 - replacement tricks
    What to do if the TPMS light is on | AUTODOC tips
  • Changing Hub bearing RENAULT WIND (E4M_) 1.2 - Replacement Tips
    How and why to check your oil | AUTODOC tips
  • Maintenance Hacks - RENAULT Wind Convertible 1.2 TCe 100 (E4MF) Wheel bearing kit replacement guide
    TOP 8 mistakes car owners make | AUTODOC tips
  • Replace Wheel hub bearing on RENAULT WIND (E4M_) - free video tips
    How to unlock your car without a key | AUTODOC tips