Disclaimer
How to change front anti roll bar links on RENAULT Megane I Convertible (EA) – replacement guide
downloads:
1
Views:
30
Important!
This replacement procedure can be used for:
RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 e (EA0F), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V (EA0H), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 (EA0G), RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 i (EA0G), RENAULT MEGANE I Cabriolet (EA0/1_) 1.4 16V (EA0D, EA1H, EA0W, EA10), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V IDE (EA03, EA0P, EA14), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V … View more
The steps may slightly vary depending on the car design.
RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 e (EA0F), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V (EA0H), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 (EA0G), RENAULT MEGANE I Cabriolet (EA0/1_) 1.6 16V (EA04, EA0B, EA11, EA1J), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 i (EA0G), RENAULT MEGANE I Cabriolet (EA0/1_) 1.4 16V (EA0D, EA1H, EA0W, EA10), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V IDE (EA03, EA0P, EA14), RENAULT MEGANE I Cabriolet (EA0/1_) 2.0 16V … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for MEGANE I Cabriolet (EA0/1_) and other RENAULT models
Anti-roll bar link
Alternative products
Anti-roll bar link
Wire brush
WD-40 spray
Copper grease
Drive socket # 13
Torx bit T45
Wheel impact socket #19
Ratchet wrench
Torque wrench
Hydraulic transmission jack
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on RENAULT MEGANE I Cabriolet (EA0/1_) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – RENAULT MEGANE I Cabriolet (EA0/1_). Use the following procedure:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the front of the car and secure on supports.Step 4
Unscrew the wheel bolts.Replacement: anti roll bar links – RENAULT MEGANE I Cabriolet (EA0/1_). Tip from AUTODOC experts:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the stabilizer rod fasteners. Use a drive socket #13. Use a ratchet wrench. - Step 8
Remove the stabilizer rod.Replacement: anti roll bar links – RENAULT MEGANE I Cabriolet (EA0/1_). Tip from AUTODOC:Examine stabiliser bushes. Replace them if needed. - Step 9
Clean all joints of the stabiliser link. Use a wire brush. Treat all joints of the stabiliser link. Use WD-40 spray. - Step 10
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the RENAULT Megane I Convertible (EA) model
Popular maintenance tutorials for Renault Megane 1 Convertible
Free download PDF
1.42 MB
Free download PDF1.44 MB
Free download PDF2.5 MB
Free download PDF4.32 MB
Free download PDF2.15 MB
Free download PDF1.3 MB
Complete guides for changing the Drop links on different RENAULT MEGANE models
Free download PDF1.98 MB
Free download PDF1.98 MB
Free download PDF2.04 MB
Free download PDF1.98 MB
Free download PDF1.94 MB
Free download PDF2.06 MB
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your RENAULT MEGANE I Cabriolet (EA0/1_)
View more
Reviving Your Car: How to Start After Extended Idle Time | AUTODOC Tips
How to get your motorcycle ready for spring
Top 5 car noises you shouldn't ignore
Save Money on Fuel with These Easy Tips | AUTODOC
Most commonly replaced car parts on RENAULT MEGANE
Time to replace parts? Get even better deals in our Shop app.
SCAN ME