Important!
This replacement procedure can be used for:
RENAULT Clio IV Hatchback (BH_) 1.2 LPG (BHMG), RENAULT Clio IV Hatchback (BH_) 1.2 16V (BHA1, BHAK, BHMG, BHMK), RENAULT Clio IV Hatchback (BH_) 0.9 TCe LPG, RENAULT Clio IV Hatchback (BH_) 1.5 dCi, RENAULT Clio IV Hatchback (BH_) 1.2 16V View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for Clio IV Hatchback (BH_) and other RENAULT models
Alternative products
How to change Wheel bearing kit on Renault Clio 4 1.5 dCi – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – RENAULT CLIO IV. Tools you might need:
Wire brush
All-purpose cleaning spray
Ceramic grease
Torque wrench
Drive socket # 30
Wheel impact socket #17
Ratchet wrench
Tap wrench
Crow bar
Hammer
Circlip pliers
Bush and bearing driver set
Wheel chock
Replacement: wheel bearing – RENAULT CLIO IV. Professionals recommend:
  • Do not re-use the bearing assembly of your RENAULT CLIO IV car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – RENAULT CLIO IV. Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Wheel Bearing on Renault Clio 4 2012 - free PDF and video manuals
    Loosen the wheel bolts. Use wheel impact socket #17. Use a tap wrench.
  2. Step 3
    Raise the car.
    Replacement: wheel bearing – RENAULT CLIO IV. AUTODOC experts recommend:
    If you are using a jack, make sure it rests on a flat surface without any unevenness.Be sure to additionally secure the car with jack stands.
    Step 4
    How to replace RENAULT Clio IV Hatchback (BH_) 1.5 dCi 2013 Wheel Bearing - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Renault Clio 4 0.9 TCe (BHNF) 2014 Wheel Bearing replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Wheel Bearing on RENAULT Clio IV Hatchback (BH_) 1.6 RS (BHJ4, BHJ6, BHMM) 2015 by yourself
    Remove the hub bearing cap. Use a crowbar. Use a hammer.
  5. Step 7
    How to remove RENAULT CLIO 1.6 RS Trophy (BHJ4, BHJ6) 2016 Wheel Bearing - online easy-to-follow instructions
    Unscrew the wheel hub fastener. Use a drive socket #30. Use a tap wrench.
  6. Step 8
    How to replace Wheel Bearing on RENAULT Clio IV Hatchback (BH_) 2017: download PDF manuals and video instructions
    Remove the fastening nut.
  7. Step 9
    How hard is it to do yourself: Wheel Bearing replacement on Renault Clio 4 1.2 16V (BHA1, BHAK, BHMG, BHMK) 2018 - download illustrated guide
    Remove the brake drum assembled with the wheel hub bearing.
    Replacement: wheel bearing – RENAULT CLIO IV. Tip:
    Examine the brake drum. Replace it if necessary.
  8. Step 10
    Need to know how to renew Wheel Bearing on RENAULT CLIO 2019? This free workshop manual will help you to do it yourself
    Remove the wheel hub bearing retaining ring. Use circlip pliers.
  9. Step 11
    Changing of Wheel Bearing on Renault Clio 4 2020 won't be an issue if you follow this illustrated step-by-step guide
    Press out the wheel hub bearing. Use a bush and bearing driver set.
  10. Step 12
    RENAULT CLIO 1.5 dCi Wheel Bearing replacement: online guides and video tutorials
    Clean the hub bearing mounting seat. Use a wire brush.
  11. Step 13
    Replacing Wheel Bearing on Renault Clio 4 2012 1.5 dCi by yourself
    Press fit the new wheel hub bearing into the brake drum. Use a bush and bearing driver set.
    AUTODOC recommends:
    Check to make sure the wheel hub bearing is positioned correctly. Avoid its misalignment.Stop pressing on the surface of the bearing immediately after it has been fitted into its mounting seat.
  12. Step 14
    Clio IV Hatchback (BH_) 1.6 RS Trophy (BHJ4, BHJ6) 2013 Wheel Bearing DIY replacement workshop manual
    Install the wheel hub bearing retaining ring. Use circlip pliers.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the RENAULT Clio IV Hatchback (BH) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY RENAULT Clio IV Hatchback (BH_) Wheel Bearing replacement - online guide
Tips & tricks for your RENAULT Clio IV Hatchback (BH_)
View more
  • How to change Wheel bearings on RENAULT Clio IV Hatchback (BH_) 1.2 16V - replacement tricks
    Top 5 Mistakes to Avoid for Safe Engine Bay Repairs | AUTODOC Tips
  • Changing Hub bearing Renault Clio 4 1.5 dCi - Replacement Tips
    DIY engine block coffee table
  • Maintenance Hacks - RENAULT Clio IV Hatchback (BH_) 0.9 TCe (BHNF) Wheel bearing kit replacement guide
    #TPMS Explained: Why Your Light is On and How to Respond Safely
  • Replace Wheel hub bearing on Renault Clio 4 - free video tips
    Checking the starter without removing it | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
RENAULT Clio IV Hatchback (BH_) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME