How to carry out replacement: Wheel Bearing 1.2 (199AXZ1A, 199BXZ1A) Fiat Punto mk3 199
Disclaimer
Change Fiat Punto mk3 199 1.2 (199AXZ1A, 199BXZ1A) Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on FIAT PUNTO (199) – replacement guide

downloads: 10
Views: 166
Download your free tutorial and fix FIAT PUNTO (199) 0.9 problems yourself Download for free 2.44 MB Wheel Bearing for Fiat Punto mk3 199 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
FIAT PUNTO (199) 1.6 16V Flex … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for PUNTO (199) and other FIAT models
Alternative products
How to change Wheel bearing kit on Fiat Punto mk3 199 1.2 (199AXZ1A, 199BXZ1A) – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – FIAT PUNTO (199). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
All-purpose cleaning spray
Copper grease
Drive socket # 12
Drive socket # 13
Drive socket # 17
Drive socket # 32
Wheel impact socket #17
Ratchet wrench
Torque wrench
Tap wrench
Hammer
Rubber mallet
Crow bar
Wheel chock
Buy tools
Replacement: wheel bearing – FIAT PUNTO (199). AUTODOC experts recommend:
  • Do not re-use the bearing assembly of your FIAT PUNTO (199) car.
  • The wheel hub bearing replacement procedure is identical for both wheels on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – FIAT PUNTO (199). Use the following procedure:
  1. Step 1
    How to change Wheel Bearing on Fiat Punto mk3 199 2012 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace FIAT PUNTO (199) 1.2 (199AXZ1A, 199BXZ1A) 2013 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Fiat Punto mk3 199 1.4 Natural Power 2014 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. FIAT PUNTO (199)
  4. Step 5
    Changing Wheel Bearing on FIAT PUNTO (199) 1.4 Bifuel 2015 by yourself
    Remove the wheel.
  5. Step 6
    How to remove FIAT PUNTO 1.4 (199AXB1A, 199BXB1A, 199BXB11, 199AXB11) 2016 Wheel Bearing - online easy-to-follow instructions
    Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Wheel Bearing on FIAT PUNTO (199) 2017: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a drive socket #13. Use a ratchet wrench.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Fiat Punto mk3 199 1.2 (199AYL1A, 199BYL1A) 2018 - download illustrated guide
    Remove the brake caliper. Use a crowbar.
    Replacement: wheel bearing – FIAT PUNTO (199). AUTODOC recommends:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  8. Step 9
    Need to know how to renew Wheel Bearing on FIAT PUNTO 2019? This free workshop manual will help you to do it yourself
    Remove the brake pads.
  9. Step 10
    Changing of Wheel Bearing on Fiat Punto mk3 199 2020 won't be an issue if you follow this illustrated step-by-step guide
    Clean the brake caliper bracket fasteners. Use a wire brush. Use WD-40 spray.
  10. Step 11
    FIAT PUNTO 1.2 (199AXZ1A, 199BXZ1A) Wheel Bearing replacement: online guides and video tutorials
    Unscrew the caliper bracket fastening. Use a drive socket #17. Use a tap wrench.
  11. Step 12
    Replacing Wheel Bearing on Fiat Punto mk3 199 2022 1.2 (199AXZ1A, 199BXZ1A) by yourself
    Remove the caliper bracket.
  12. Step 13
    PUNTO (199) 1.4 (199AXB1A, 199BXB1A, 199BXB11, 199AXB11) 2023 Wheel Bearing DIY replacement workshop manual
    Clean the brake disc fasteners. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on FIAT PUNTO (199) 2024 - tips and tricks
    Unscrew the brake disc fastening. Use a drive socket #12. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement Fiat Punto mk3 199 2025 1.4 (199AXB1A, 199BXB1A, 199BXB11, 199AXB11) Wheel Bearing
    Remove the brake disc. Use a rubber mallet.
  15. Step 16
    DIY replacement of Wheel Bearing on FIAT PUNTO (199) 1.3 D Multijet 2012 is not an issue anymore with our step-by-step tutorial
    Remove the hub bearing protection cap. Use a crowbar. Use a hammer.
    Replacement: wheel bearing – FIAT PUNTO (199). Tip from AUTODOC experts:
    Some cars are not equipped with wheel hub caps.
  16. Step 17
    How to change Wheel Bearing on Fiat Punto mk3 199 2012 - free PDF and video manuals
    Unscrew the wheel hub axle nut. Use a drive socket #32. Use a tap wrench.
  17. Step 18
    How to replace FIAT PUNTO (199) 1.2 (199AXZ1A, 199BXZ1A) 2013 Wheel Bearing - step-by-step manuals and video guides
    Remove the hub and the bearing together, since they are a sealed unit.
  18. Step 19
    Fiat Punto mk3 199 1.4 Natural Power 2014 Wheel Bearing replacement: free workshop manuals
    Clean the hub bearing mounting seat. Use all-purpose cleaning spray.
  19. Step 20
    Changing Wheel Bearing on FIAT PUNTO (199) 1.4 Bifuel 2015 by yourself
    Install the new wheel hub with a bearing.
  20. Step 21
    How to remove FIAT PUNTO 1.4 (199AXB1A, 199BXB1A, 199BXB11, 199AXB11) 2016 Wheel Bearing - online easy-to-follow instructions
    Tighten the hub. Use a drive socket #32. Use a torque wrench. Tighten it to 224 Nm torque.
    Replacement: wheel bearing – FIAT PUNTO (199). Tip:
    The wheel bearing unit must not tilt on the axle pin.
  21. Step 22
    How to replace Wheel Bearing on FIAT PUNTO (199) 2017: download PDF manuals and video instructions
    Install the hub bearing protection cap. Use a rubber mallet.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the FIAT Punto III Hatchback (199) model

Fiat Punto mk3 199 tyre size

Popular maintenance tutorials for Fiat Punto mk3 199

More manuals for Fiat Punto mk3 199

Complete guides for changing the Wheel bearings on different FIAT PUNTO models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY FIAT PUNTO (199) Wheel Bearing replacement - online guide
Tips & tricks for your FIAT PUNTO (199)
View more
  • How to change Wheel bearings on FIAT PUNTO (199) 1.3 D Multijet - replacement tricks
    DIY brake caliper restoration | AUTODOC tips
    819K views
    Published on: 02/06/2022
  • Changing Hub bearing Fiat Punto mk3 199 1.2 (199AXZ1A, 199BXZ1A) - Replacement Tips
    Top 5 reasons why the suspension knocks | AUTODOC tips
    2M views
    Published on: 09/09/2022
  • Maintenance Hacks - FIAT PUNTO (199) 1.4 Natural Power Wheel bearing kit replacement guide
    Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
    6K views
    Published on: 20/10/2020
  • Replace Wheel hub bearing on Fiat Punto mk3 199 - free video tips
    #DIY Guide: How to Fix a Cracked Windscreen Without a Garage Visit
    9K views
    Published on: 14/12/2023

Most commonly replaced car parts on FIAT PUNTO

Professional manuals for the most common FIAT models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
FIAT PUNTO (199) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME