How to carry out replacement: Wheel Bearing 1.8 T Audi TT 8N
Disclaimer
Change Audi TT 8N 3.2 VR6 quattro Wheel Bearing yourself – manuals and video tutorials

How to change rear wheel bearing on AUDI TT Coupe (8N3) – replacement guide

downloads: 15
Views: 256
Download your free tutorial and fix AUDI TT Coupe (8N3) 1.8 T quattro problems yourself Download for free 3.01 MB Wheel Bearing for Audi TT 8N Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Wheel Bearing for TT Coupe (8N3) and other AUDI models
Alternative products
How to change Wheel bearing kit on Audi TT 8N 1.8 T – step-by-step instructions for straightforward car repair Wheel bearing kit
Tools
Replacement: wheel bearing – AUDI TT (8N3). Tools you might need:
Wire brush
WD-40 spray
Brake cleaner
Torx bit T30
Combination spanner #13
Combination spanner #15
Drive socket # 13
Torque wrench
Copper grease
Wheel impact socket #17
Flat chisel
Hammer
3-Arm Gear Puller
12-point socket # 32
Rubber mallet
Crow bar
Wheel chock
Buy tools
Replacement: wheel bearing – AUDI TT (8N3). AUTODOC experts recommend:
  • The replacement procedure is identical for the left and right wheel hubs on the same axle.
  • All work should be done with the engine stopped.
Replacement: wheel bearing – AUDI TT (8N3). Use the following procedure:
  1. Step 1
    How to change Wheel Bearing on Audi TT 8N 1998 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI TT Coupe (8N3) 1.8 T 1999 Wheel Bearing - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi TT 8N 1.8 T quattro 2000 Wheel Bearing replacement: free workshop manuals
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Important! Hold the wheel while unscrewing the fastening bolts. AUDI TT (8N3)
  4. Step 5
    Changing Wheel Bearing on AUDI TT Coupe (8N3) 1.8 T 2001 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI TT 1.8 T quattro 2002 Wheel Bearing - online easy-to-follow instructions
    Spread the brake pads. Use a crowbar.
  6. Step 7
    How to replace Wheel Bearing on AUDI TT Coupe (8N3) 2003: download PDF manuals and video instructions
    Unscrew the brake caliper fastening. Use a combination spanner #13. Use a combination spanner #15.
  7. Step 8
    How hard is it to do yourself: Wheel Bearing replacement on Audi TT 8N 1.8 T 2004 - download illustrated guide
    Remove the brake caliper.
    Replacement: wheel bearing – AUDI TT (8N3). Tip:
    Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur.
  8. Step 9
    Need to know how to renew Wheel Bearing on AUDI TT 2005? This free workshop manual will help you to do it yourself
    Remove the brake pads.
  9. Step 10
    Changing of Wheel Bearing on Audi TT 8N 2006 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the brake disc mounting bolts and remove it. Use Torx T30.
    Replacement: wheel bearing – AUDI TT (8N3). AUTODOC recommends:
    If necessary, use a rubber mallet.
  10. Step 11
    AUDI TT 3.2 VR6 quattro Wheel Bearing replacement: online guides and video tutorials
    Pry up and remove the wheel hub cap. Use a crowbar.
    Replacement: wheel bearing – AUDI TT (8N3). Tip from AUTODOC experts:
    If necessary, use a flat chisel and a hammer.
  11. Step 12
    Replacing Wheel Bearing on Audi TT 8N 1999 1.8 T by yourself
    Unscrew the wheel hub fastening nut. Use drive 12-point socket #32.
  12. Step 13
    TT Coupe (8N3) 1.8 T quattro 2000 Wheel Bearing DIY replacement workshop manual
    Clean the hub. Use WD-40 spray.
  13. Step 14
    How to change Wheel Bearing on AUDI TT Coupe (8N3) 2001 - tips and tricks
    Remove the hub and the bearing together, since they are a sealed unit. Use 3-Arm Gear Puller.
  14. Step 15
    Step-by-step recommendations for DIY replacement Audi TT 8N 2002 1.8 T quattro Wheel Bearing
    Clean the guiding part of the stub axle. Use a wire brush.
    Replacement: wheel bearing – AUDI TT (8N3). Tip from AUTODOC:
    Be careful to avoid damaging the guiding part of the stub axle.
  15. Step 16
    DIY replacement of Wheel Bearing on AUDI TT Coupe (8N3) 3.2 VR6 quattro 2003 is not an issue anymore with our step-by-step tutorial
    Clean the hub bearing mounting seat. Use a wire brush. Use WD-40 spray.
  16. Step 17
    How to change Wheel Bearing on Audi TT 8N 1998 - free PDF and video manuals
    Apply special grease to the bearing assembly mounting seat.
  17. Step 18
    How to replace AUDI TT Coupe (8N3) 1.8 T 1999 Wheel Bearing - step-by-step manuals and video guides
    Install the new wheel hub with a bearing.
  18. Step 19
    Audi TT 8N 1.8 T quattro 2000 Wheel Bearing replacement: free workshop manuals
    Move the hub as far as it can go.
  19. Step 20
    Changing Wheel Bearing on AUDI TT Coupe (8N3) 1.8 T 2001 by yourself
    Screw the wheel hub lock nut.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8N3) model

Audi TT 8N tyre size

Popular maintenance tutorials for Audi TT 8N

More manuals for Audi TT 8N

Complete guides for changing the Wheel bearings on different AUDI TT models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY AUDI TT Coupe (8N3) Wheel Bearing replacement - online guide
Tips & tricks for your AUDI TT Coupe (8N3)
View more
  • How to change Wheel bearings on AUDI TT Coupe (8N3) 3.2 VR6 quattro - replacement tricks
    The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
    9K views
    Published on: 08/12/2020
  • Changing Hub bearing Audi TT 8N 1.8 T - Replacement Tips
    BMW E30 Turbo Suspension Swap: Boost Your Handling | AUTODOC project
    2K views
    Published on: 04/03/2021
  • Maintenance Hacks - AUDI TT Coupe (8N3) 1.8 T quattro Wheel bearing kit replacement guide
    DIY rear axle restoration | Drivetrain restoration – Part 2
    7K views
    Published on: 07/11/2024
  • Replace Wheel hub bearing on Audi TT 8N - free video tips
    Transform Your Engine Bay: Affordable Valve Cover Restoration with AUTODOC
    8K views
    Published on: 29/06/2023

Most commonly replaced car parts on AUDI TT

Professional manuals for the most common AUDI models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
AUDI TT Coupe (8N3) Wheel Bearing replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME