Important!
This replacement procedure can be used for:
AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T quattro, AUDI TT Coupe (8N3) 1.8 T View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: strut mount – AUDI TT (8N3). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 16
Combination spanner #16
Torque wrench
Adjustable wrench
Wheel impact socket #17
Hydraulic transmission jack
Wheel chock
Replacement: strut mount – AUDI TT (8N3). AUTODOC recommends:
  • All work should be done with the engine stopped.
  • The replacement procedure is identical for the mounts of the right and left shock absorbers of the rear suspension.
  • Both mounts of the rear shock struts should be replaced simultaneously.
  • Be sure to replace all self-locking nuts and bolts during installation.
Replacement: strut mount – AUDI TT (8N3). Recommended sequence of steps:
  1. Step 1
    How to change Strut Mount on Audi TT 8N 1998 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI TT Coupe (8N3) 1.8 T 1999 Strut Mount - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi TT 8N 1.8 T quattro 2000 Strut Mount replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: strut mount – AUDI TT (8N3). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Strut Mount on AUDI TT Coupe (8N3) 1.8 T 2001 by yourself
    Remove the wheel.
  5. Step 6
    How to remove AUDI TT 1.8 T quattro 2002 Strut Mount - online easy-to-follow instructions
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  6. Step 7
    How to replace Strut Mount on AUDI TT Coupe (8N3) 2003: download PDF manuals and video instructions
    Support the arm. Use a hydraulic transmission jack.
  7. Step 8
    How hard is it to do yourself: Strut Mount replacement on Audi TT 8N 1.8 T 2004 - download illustrated guide
    Unscrew the lower fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16.
  8. Step 9
    Need to know how to renew Strut Mount on AUDI TT 2005? This free workshop manual will help you to do it yourself
    Unscrew the upper fastener of the shock absorber. Use a drive socket #16.
    AUTODOC recommends:
    Important! Hold the shock absorber while unscrewing the fastening bolts. AUDI TT (8N3)
  9. Step 10
    Changing of Strut Mount on Audi TT 8N 2006 won't be an issue if you follow this illustrated step-by-step guide
    Remove the support from under the rear arm.
  10. Step 11
    AUDI TT 3.2 VR6 quattro Strut Mount replacement: online guides and video tutorials
    Remove the shock absorber.
  11. Step 12
    Replacing Strut Mount on Audi TT 8N 1999 1.8 T by yourself
    Remove the protective cap of the shock absorber mount.
  12. Step 13
    TT Coupe (8N3) 1.8 T quattro 2000 Strut Mount DIY replacement workshop manual
    Clean the shock absorber rod fastener. Use a wire brush. Use WD-40 spray.
  13. Step 14
    How to change Strut Mount on AUDI TT Coupe (8N3) 2001 - tips and tricks
    Remove the shock absorber piston rod fastening. Use a combination spanner #16. Use an adjustable wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement Audi TT 8N 2002 1.8 T quattro Strut Mount
    Remove the shock absorber mount, boot and bump stop.
    AUTODOC recommends:
    Τhoroughly examine the shock absorber mount, dust boot, bump stop. Replace them if necessary.
  15. Step 16
    DIY replacement of Strut Mount on AUDI TT Coupe (8N3) 3.2 VR6 quattro 2003 is not an issue anymore with our step-by-step tutorial
    Install the boot and a bump stop onto the shock absorber.
  16. Step 17
    How to change Strut Mount on Audi TT 8N 1998 - free PDF and video manuals
    Install the new shock absorber mount.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI TT Coupe (8N3) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI TT Coupe (8N3) Strut Mount replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
Autodoc CLUB App icon
DIY AUDI TT Coupe (8N3) Strut Mount replacement - online guide
Tips & tricks for your AUDI TT Coupe (8N3)
View more
  • How to change Strut mount on AUDI TT Coupe (8N3) 3.2 VR6 quattro - replacement tricks
    Causes of a worn car boot damper | AUTODOC
  • Changing Top mount Audi TT 8N 1.8 T - Replacement Tips
    Things you should never do with your manual transmission | AUTODOC tips
  • Maintenance Hacks - AUDI TT Coupe (8N3) 1.8 T quattro Top strut mount replacement guide
    What to do if your car heater isn't working | AUTODOC tips
  • Replace Top mounts on Audi TT 8N - free video tips
    How to restore a damaged thread | AUTODOC tips

Professional manuals for the most common AUDI models