Important!
This replacement procedure can be used for:
VW Golf VI Convertible (517) 2.0 R, VW Golf VI Convertible (517) 2.0 TDI, VW Golf VI Convertible (517) 1.6 TDI, VW Golf VI Convertible (517) 2.0 GTI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.4 TSI, VW Golf VI Convertible (517) 1.2 TSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: rear suspension lower trailing arm – VW GOLF VI Convertible (517). List of the tools you'll need:
Wire brush
WD-40 spray
Copper grease
Drive socket # 15
Drive socket # 16
Drive socket # 18
Combination spanner #16
XZN socket bit # 6
Wheel impact socket #17
Ratchet wrench
Torque wrench
Pin punch
Hammer
Tap wrench
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower trailing arm – VW GOLF VI Convertible (517). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – VW GOLF VI Convertible (517). Recommended sequence of steps:
  1. Step 1
    How to change Control Arm on VW Golf 6 Convertible 2011 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace VW Golf VI Convertible (517) 1.6 TDI 2012 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    VW Golf 6 Convertible 2.0 TDI 2013 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower trailing arm – VW GOLF VI Convertible (517). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on VW Golf VI Convertible (517) 1.4 TSI 2014 by yourself
    Remove the wheel.
  5. Step 6
    How to remove VW GOLF 2.0 GTI 2015 Control Arm - online easy-to-follow instructions
    Support the arm. Use a hydraulic transmission jack.
  6. Step 7
    How to replace Control Arm on VW Golf VI Convertible (517) 2016: download PDF manuals and video instructions
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  7. Step 8
    How hard is it to do yourself: Control Arm replacement on VW Golf 6 Convertible 2.0 R 2011 - download illustrated guide
    Disconnect the transverse stabilizer fastener from the link. Use a combination spanner #16. Use XZN #6. Use a ratchet wrench.
  8. Step 9
    Need to know how to renew Control Arm on VW GOLF 2012? This free workshop manual will help you to do it yourself
    Remove the retaining clip of the parking brake cable. Use a pin punch. Use a hammer.
  9. Step 10
    Changing of Control Arm on VW Golf 6 Convertible 2013 won't be an issue if you follow this illustrated step-by-step guide
    Undo the bracket attaching the parking brake cable to the trailing arm.
  10. Step 11
    VW GOLF 2.0 TDI Control Arm replacement: online guides and video tutorials
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a drive socket #18. Use a tap wrench.
  11. Step 12
    Replacing Control Arm on VW Golf 6 Convertible 2015 1.6 TDI by yourself
    Unscrew the fastener connecting the trailing arm to the car body. Use a drive socket #15. Use a ratchet wrench.
  12. Step 13
    Golf VI Convertible (517) 2.0 GTI 2016 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 14
    How to change Control Arm on VW Golf VI Convertible (517) 2011 - tips and tricks
    Unscrew the bracket fastening to the arm. Use a drive socket #18. Use a ratchet wrench.
  14. Step 15
    Step-by-step recommendations for DIY replacement VW Golf 6 Convertible 2012 2.0 GTI Control Arm
    Remove the bracket from the arm.
  15. Step 16
    DIY replacement of Control Arm on VW Golf VI Convertible (517) 1.2 TSI 2013 is not an issue anymore with our step-by-step tutorial
    Fit the new suspension trailing arm into the bracket. Use a drive socket #18. Use a torque wrench. Tighten it to 90 Nm torque.+90°
    AUTODOC recommends:
    Important! Be sure to use new fasteners.
  16. Step 17
    How to change Control Arm on VW Golf 6 Convertible 2011 - free PDF and video manuals
    Install a new arm.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Golf VI Convertible (517) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Golf VI Convertible (517) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Golf VI Convertible (517) Control Arm replacement - online guide
Tips & tricks for your VW Golf VI Convertible (517)
View more
  • How to change Control arm on VW Golf VI Convertible (517) 1.2 TSI - replacement tricks
    DIY alternator repair | AUTODOC tips
  • Changing Wishbone VW Golf 6 Convertible 1.6 TDI - Replacement Tips
    How to shine your tyres | AUTODOC tips
  • Maintenance Hacks - VW Golf VI Convertible (517) 2.0 TDI Control arms replacement guide
    How to unlock your car without a key | AUTODOC tips
  • Replace Trailing arm on VW Golf 6 Convertible - free video tips
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips