How to carry out replacement: Control Arm 3.0 D-4D (KDJ155_, KDJ150_) Toyota Land Cruiser 150
Disclaimer
Change Toyota Land Cruiser 150 4.0 V6 VVTi (GRJ150_) Control Arm yourself – manuals and video tutorials

How to change rear suspension lower trailing arm on TOYOTA Land Cruiser Prado 150 (J150) – replacement guide

downloads: 22
Views: 148
Download your free tutorial and fix TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 Dual VVTi (GRJ150_) problems yourself Download for free 1.71 MB Control Arm for Toyota Land Cruiser 150 Shop now
Leave a comment Open in a new tab
Important!
This replacement procedure can be used for:
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVT-i (GRJ150_, GRJ125_, GRJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ155_, KDJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.7 (TRJ150_, TRJ155_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ150_, KDJ150, KDJ155), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 Dual VVTi (GRJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ150_, GDJ155_, GDJ150) … View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for LAND CRUISER 150 (KDJ15_, GRJ15_) and other TOYOTA models
Alternative products
How to change Suspension arm on Toyota Land Cruiser 150 3.0 D-4D (KDJ155_, KDJ150_) – step-by-step instructions for straightforward car repair Suspension arm
Tools
Replacement: rear suspension lower trailing arm – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Tools you need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #19
Drive socket # 12
Drive socket # 19
Wheel impact socket #21
Torque wrench
Tap wrench
Crow bar
Hydraulic transmission jack
Wheel chock
Buy tools
Replacement: rear suspension lower trailing arm – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). AUTODOC recommends:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower trailing arm – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Take the following steps:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Toyota Land Cruiser 150 2009 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ155_, KDJ150_) 2010 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: rear suspension lower trailing arm – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Toyota Land Cruiser 150 3.0 D-4D (KDJ150_, KDJ150, KDJ155) 2011 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 TDi (KDJ150_) 2012 by yourself
    Clean all joints of the arm. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove TOYOTA LAND CRUISER 2.7 (TRJ150_, TRJ155_) 2013 Control Arm - online easy-to-follow instructions
    Unscrew the arm fastening to the beam. Use a drive socket #19. Use a tap wrench.
  6. Step 8
    How to replace Control Arm on TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2014: download PDF manuals and video instructions
    Unscrew the fastener connecting the trailing arm to the car body. Use a combination spanner #19. Use a drive socket #19. Use a tap wrench.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on Toyota Land Cruiser 150 4.0 V6 VVT-i (GRJ150_, GRJ125_, GRJ150) 2015 - download illustrated guide
    Support the rear suspension beam. Use a hydraulic transmission jack.
  8. Step 10
    Need to know how to renew Control Arm on TOYOTA LAND CRUISER 2016? This free workshop manual will help you to do it yourself
    Clean the parking brake bracket. Use a wire brush. Use WD-40 spray.
  9. Step 11
    Changing of Control Arm on Toyota Land Cruiser 150 2017 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the bolt and remove the parking brake cable bracket from the trailing arm. Use a drive socket #12.
  10. Step 12
    TOYOTA LAND CRUISER 4.0 V6 VVTi (GRJ150_) Control Arm replacement: online guides and video tutorials
    Remove the fastening bolts.
  11. Step 13
    Replacing Control Arm on Toyota Land Cruiser 150 2019 3.0 D-4D (KDJ155_, KDJ150_) by yourself
    Remove the arm.
  12. Step 14
    LAND CRUISER 150 (KDJ15_, GRJ15_) 2.7 (TRJ150_, TRJ155_) 2020 Control Arm DIY replacement workshop manual
    Install a new arm.
    Replacement: rear suspension lower trailing arm – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Tip from AUTODOC experts:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  13. Step 15
    How to change Control Arm on TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2021 - tips and tricks
    Install the control arm fasteners. Use a crowbar.
  14. Step 16
    Step-by-step recommendations for DIY replacement Toyota Land Cruiser 150 2022 2.7 (TRJ150_, TRJ155_) Control Arm
    Tighten the fastener connecting the trailing arm to the car body. Screw in the fastener connecting the control arm to the rear subframe. Use a combination spanner #19.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the TOYOTA Land Cruiser Prado 150 (J150) model

Toyota Land Cruiser 150 tyre size

Popular maintenance tutorials for Toyota Land Cruiser 150

More manuals for Toyota Land Cruiser 150

Complete guides for changing the Control arm on different TOYOTA LAND CRUISER models

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) Control Arm replacement - online guide
Tips & tricks for your TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_)
View more
  • How to change Control arm on TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ150_, GDJ155_, GDJ150) - replacement tricks
    TOP 5 mistakes during DIY oil change | AUTODOC tips
    37K views
    Published on: 17/06/2021
  • Changing Wishbone Toyota Land Cruiser 150 3.0 D-4D (KDJ155_, KDJ150_) - Replacement Tips
    How do EGR valves work? | AUTODOC
    23K views
    Published on: 18/07/2020
  • Maintenance Hacks - TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ150_, KDJ150, KDJ155) Control arms replacement guide
    How to remove scratches from car plastic | AUTODOC tips
    188K views
    Published on: 15/12/2022
  • Replace Trailing arm on Toyota Land Cruiser 150 - free video tips
    Top 7 signs of a bad starter
    6K views
    Published on: 20/03/2025

Most commonly replaced car parts on TOYOTA LAND CRUISER

Professional manuals for the most common TOYOTA models

ОЕ number
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME