Disclaimer
How to change front brake pads on TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) – replacement guide
downloads:
18
Views:
331
Recommended replacement interval for the part category Brake pad set : 30000 km
Important!
This replacement procedure can be used for:
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVT-i (GRJ150_, GRJ125_, GRJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ155_, KDJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.7 (TRJ150_, TRJ155_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150, GRJ151), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ150_, KDJ150, KDJ155), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 Dual VVTi (GRJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 TDi (KDJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ150_, GDJ155_, GDJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ150, GDJ155), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ155, GDJ150) … View more
The steps may slightly vary depending on the car design.
TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVT-i (GRJ150_, GRJ125_, GRJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ155_, KDJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.7 (TRJ150_, TRJ155_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150, GRJ151), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 D-4D (KDJ150_, KDJ150, KDJ155), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 Dual VVTi (GRJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 3.0 TDi (KDJ150_), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 4.0 V6 VVTi (GRJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ150_, GDJ155_, GDJ150), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ150, GDJ155), TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_) 2.8 D-4D (GDJ155, GDJ150) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Brake Pads for LAND CRUISER 150 (KDJ15_, GRJ15_) and other TOYOTA models
Alternative products

Wire brush
Brake cleaner
Copper grease
Anti-squeal paste
Wheel impact socket #21
Torque wrench
Flat Screwdriver
Pin punch
Rubber mallet
Crow bar
Wheel chock
Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Tip from AUTODOC experts:
- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- All work should be done with the engine stopped.
Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Take the following steps:
- Step 1Open the bonnet. Unscrew the brake fluid reservoir cap.Step 2
Secure the wheels with chocks. - Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #21. - Step 4Raise the front of the car and secure on supports.Step 5
Unscrew the wheel bolts.Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). AUTODOC recommends:To avoid injury, hold up the wheel when unscrewing the bolts. - Step 6
Remove the wheel. - Step 7
Clean the brake pads fasteners. Use a wire brush. Use a brake cleaner.AUTODOC recommends:Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). After applying the spray, wait a few minutes. - Step 8
Remove the brake pads retaining clips. Use a crowbar. Use a flat screwdriver. - Step 9
Remove the retainer of the brake pads. Use a pin punch. Use a rubber mallet. - Step 10
Remove the retaining spring of the brake pads. - Step 11
Spread the brake pads. Use a crowbar. - Step 12
Remove the brake pads.Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). AUTODOC experts recommend:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced. - Step 13
Clean the brake caliper surface. Use a wire brush. Use a brake cleaner.Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Tip:After applying the spray, wait a few minutes. - Step 14
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). Professionals recommend:Make sure the disc surface is clean before installing the pads. - Step 15
Install new brake pads.Replacement: brake pads – TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_). AUTODOC recommends:Make sure the pads are installed with linings facing the disc.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the TOYOTA Land Cruiser Prado 150 (J150) model
Popular maintenance tutorials for Toyota Land Cruiser 150
Complete guides for changing the Brake pad set on different TOYOTA LAND CRUISER models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your TOYOTA LAND CRUISER 150 (KDJ15_, GRJ15_)
View more
#TPMS Explained: Why Your Light is On and How to Respond Safely
Extend your engine's life: Avoid these 3 damaging factors | AUTODOC tips
Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
Most commonly replaced car parts on TOYOTA LAND CRUISER
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























