Important!
This replacement procedure can be used for:
NISSAN X-TRAIL (T31) 2.0 dCi, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.0 4x4, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.5 4x4, NISSAN X-TRAIL (T31) 2.0 FWD, NISSAN X-TRAIL (T31) 2.0 FWD, NISSAN X-TRAIL (T31) 2.0 4x4, NISSAN X-TRAIL (T31) 2.0 4x4, NISSAN X-TRAIL (T31) 2.5 4x4, NISSAN X-TRAIL (T31) 2.5, NISSAN X-TRAIL (T31) 2.0 dCi 4x4, NISSAN X-TRAIL (T31) 2.5 4x4, NISSAN X-TRAIL (T31) 2.0, NISSAN X-TRAIL (T31) 2.5, NISSAN X-TRAIL (T31) 2.5 4x4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for X-TRAIL (T31) and other NISSAN models
Tools
Replacement: rear suspension lower control arm – NISSAN X-TRAIL (T31). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Torque wrench
Combination spanner #16
Combination spanner #18
Combination spanner #21
Drive socket # 18
Drive socket # 21
Wheel impact socket #21
Ratchet wrench
Hammer
Pin punch
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower control arm – NISSAN X-TRAIL (T31). Tip from AUTODOC experts:
  • The replacement procedure is identical for the left and right lower control arms.
  • Please note: all work on the car – NISSAN X-TRAIL (T31) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Control Arm on Nissan X-Trail T31 2007 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #21.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace NISSAN X-TRAIL (T31) 2.0 dCi 4x4 2008 Control Arm - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    Replacement: rear suspension lower control arm – NISSAN X-TRAIL (T31). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  3. Step 5
    Nissan X-Trail T31 2.0 dCi 2009 Control Arm replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Control Arm on NISSAN X-TRAIL (T31) 2.0 4x4 2010 by yourself
    Clean the control arm fasteners. Use a wire brush. Use WD-40 spray.
  5. Step 7
    How to remove NISSAN X-TRAIL 2.0 FWD 2011 Control Arm - online easy-to-follow instructions
    Make a mark on the camber adjustment bolt.
  6. Step 8
    How to replace Control Arm on NISSAN X-TRAIL (T31) 2012: download PDF manuals and video instructions
    Unscrew the fastener connecting the control arm to the rear subframe. Use a combination spanner #21. Use a drive socket #21. Use a ratchet wrench.
  7. Step 9
    How hard is it to do yourself: Control Arm replacement on Nissan X-Trail T31 2.0 dCi 2013 - download illustrated guide
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #18. Use a drive socket #21. Use a ratchet wrench.
  8. Step 10
    Need to know how to renew Control Arm on NISSAN X-TRAIL 2014? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer bar with the control arm. Use a combination spanner #16. Use a drive socket #18. Use a ratchet wrench.
  9. Step 11
    Changing of Control Arm on Nissan X-Trail T31 2015 won't be an issue if you follow this illustrated step-by-step guide
    Support the arm. Use a hydraulic transmission jack.
  10. Step 12
    NISSAN X-TRAIL 2.0 4x4 Control Arm replacement: online guides and video tutorials
    Remove the fastening bolt. Use a pin punch. Use a hammer.
  11. Step 13
    Replacing Control Arm on Nissan X-Trail T31 2017 2.0 dCi 4x4 by yourself
    Remove the fastening bolt.
  12. Step 14
    X-TRAIL (T31) 2.0 FWD 2018 Control Arm DIY replacement workshop manual
    Remove the arm.
  13. Step 15
    How to change Control Arm on NISSAN X-TRAIL (T31) 2007 - tips and tricks
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
  14. Step 16
    Step-by-step recommendations for DIY replacement Nissan X-Trail T31 2008 2.0 FWD Control Arm
    Install a new arm.
  15. Step 17
    DIY replacement of Control Arm on NISSAN X-TRAIL (T31) 2.5 4x4 2009 is not an issue anymore with our step-by-step tutorial
    Install the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the NISSAN X-Trail (T31) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
NISSAN X-TRAIL (T31) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY NISSAN X-TRAIL (T31) Control Arm replacement - online guide
Tips & tricks for your NISSAN X-TRAIL (T31)
View more
  • How to change Control arm on NISSAN X-TRAIL (T31) 2.5 4x4 - replacement tricks
    How do EGR valves work? | AUTODOC
  • Changing Wishbone Nissan X-Trail T31 2.0 dCi 4x4 - Replacement Tips
    Top 5 tips to prevent car rust | AUTODOC tips
  • Maintenance Hacks - NISSAN X-TRAIL (T31) 2.0 dCi Control arms replacement guide
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Replace Trailing arm on Nissan X-Trail T31 - free video tips
    How and why to check your oil | AUTODOC tips