Important!
This replacement procedure can be used for:
AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 3.7, AUDI A8 (4D2, 4D8) 3.7 quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) S8 quattro, AUDI A8 (4D2, 4D8) 2.5 TDI, AUDI A8 (4D2, 4D8) 2.5 TDI quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 3.7 quattro, AUDI A8 (4D2, 4D8) 3.7, AUDI A8 (4D2, 4D8) 3.3 TDI quattro, AUDI A8 (4D2, 4D8) S8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 6.0 W12 quattro, AUDI A8 (4D2, 4D8) 2.5 TDI quattro, AUDI A8 (4D2, 4D8) 2.5 TDI, AUDI A8 (4D2, 4D8) 4.2 quattro View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Control Arm for A8 (4D2, 4D8) and other AUDI models
Tools
Replacement: rear suspension lower control arm – AUDI A8 (4D2, 4D8). List of the tools you'll need:
Wire brush
WD-40 spray
Brake cleaner
Copper grease
Combination spanner #19
Drive socket # 19
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Pin punch
Rubber mallet
Ball joint puller
Crow bar
Hydraulic transmission jack
Wheel chock
Replacement: rear suspension lower control arm – AUDI A8 (4D2, 4D8). Professionals recommend:
  • The replacement procedure is identical for the left and right lower control arms.
  • All work should be done with the engine stopped.
Replacement: rear suspension lower control arm – AUDI A8 (4D2, 4D8). Use the following procedure:
  1. Step 1
    How to change Control Arm on Audi A8 D2 1994 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace AUDI A8 (4D2, 4D8) 4.2 quattro 1995 Control Arm - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Audi A8 D2 S8 quattro 1996 Control Arm replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: rear suspension lower control arm – AUDI A8 (4D2, 4D8). AUTODOC recommends:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Control Arm on AUDI A8 (4D2, 4D8) 2.5 TDI 1997 by yourself
    Remove the wheel.
  5. Step 6
    Clean the fastener connecting the rear knuckle to the suspension control arm. Use a wire brush. Use WD-40 spray.
    Step 7
    How to remove AUDI A8 2.8 quattro 1998 Control Arm - online easy-to-follow instructions
    Unscrew the fastener connecting the control arm to the rear knuckle. Use a combination spanner #19.
  6. Step 8
    Clean the fasteners connecting the control arm to the subframe. Use a wire brush. Use WD-40 spray.
    Step 9
    How to replace Control Arm on AUDI A8 (4D2, 4D8) 1999: download PDF manuals and video instructions
    Unscrew the arm fastening from the subframe. Use a combination spanner #19. Use a drive socket #19. Use a ratchet wrench.
  7. Step 10
    Remove the fastening bolt. Use a crowbar.
    Step 11
    How hard is it to do yourself: Control Arm replacement on Audi A8 D2 2.8 2000 - download illustrated guide
    Detach the lower control arm. Use a ball joint puller.
  8. Step 12
    Need to know how to renew Control Arm on AUDI A8 2001? This free workshop manual will help you to do it yourself
    Remove the arm. Use a crowbar. Use a rubber mallet.
  9. Step 13
    Clean the mounting seats and the thread of the suspension arm. Use a wire brush. Use WD-40 spray.
    Step 14
    Changing of Control Arm on Audi A8 D2 2002 won't be an issue if you follow this illustrated step-by-step guide
    Install a new arm. Use a rubber mallet.
    Replacement: rear suspension lower control arm – AUDI A8 (4D2, 4D8). Tip:
    During the installation process, use only new bolts and nuts.Do not damage the ball joint cover.
  10. Step 15
    AUDI A8 4.2 quattro Control Arm replacement: online guides and video tutorials
    Install the fastening bolt. Use a pin punch. Use a hammer.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the AUDI A8 D2 (4D2, 4D8) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
AUDI A8 (4D2, 4D8) Control Arm replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY AUDI A8 (4D2, 4D8) Control Arm replacement - online guide
Tips & tricks for your AUDI A8 (4D2, 4D8)
View more
  • How to change Control arm on AUDI A8 (4D2, 4D8) 3.3 TDI quattro - replacement tricks
    Things you should never do with an automatic transmission | AUTODOC tips
  • Changing Wishbone Audi A8 D2 4.2 quattro - Replacement Tips
    Top 5 mistakes when working in the engine bay | AUTODOC tips
  • Maintenance Hacks - AUDI A8 (4D2, 4D8) S8 quattro Control arms replacement guide
    How to unlock your car without a key | AUTODOC tips
  • Replace Trailing arm on Audi A8 D2 - free video tips
    Petrol or diesel? What's the difference between these engines? | AUTODOC

Professional manuals for the most common AUDI models