Disclaimer
How to change front strut mount on AUDI A8 (4D2, 4D8) – replacement guide
downloads:
13
Views:
182
Important!
This replacement procedure can be used for:
AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 3.7, AUDI A8 (4D2, 4D8) 3.7 quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) S8 quattro, AUDI A8 (4D2, 4D8) 2.5 TDI, AUDI A8 (4D2, 4D8) 2.5 TDI quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 3.7 quattro, AUDI A8 (4D2, 4D8) 3.7, AUDI A8 (4D2, 4D8) 3.3 TDI quattro, AUDI A8 (4D2, 4D8) S8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 6.0 W12 quattro, AUDI A8 (4D2, 4D8) 2.5 TDI quattro, AUDI A8 (4D2, 4D8) 2.5 TDI … View more
The steps may slightly vary depending on the car design.
AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 3.7, AUDI A8 (4D2, 4D8) 3.7 quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) S8 quattro, AUDI A8 (4D2, 4D8) 2.5 TDI, AUDI A8 (4D2, 4D8) 2.5 TDI quattro, AUDI A8 (4D2, 4D8) 2.8, AUDI A8 (4D2, 4D8) 2.8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 3.7 quattro, AUDI A8 (4D2, 4D8) 3.7, AUDI A8 (4D2, 4D8) 3.3 TDI quattro, AUDI A8 (4D2, 4D8) S8 quattro, AUDI A8 (4D2, 4D8) 4.2 quattro, AUDI A8 (4D2, 4D8) 6.0 W12 quattro, AUDI A8 (4D2, 4D8) 2.5 TDI quattro, AUDI A8 (4D2, 4D8) 2.5 TDI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Strut Mount for A8 (4D2, 4D8) and other AUDI models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
HEX bit No.H6.
Drive socket # 13
Drive socket # 17
Drive socket # 18
Combination spanner #17
Combination spanner #18
Wheel impact socket #17
Ratchet wrench
Torque wrench
Hammer
Pin punch
Flat chisel
Rubber mallet
Flat Screwdriver
Pliers
Hydraulic transmission jack
Hydraulic strut spring compressor
Fender cover
Wheel chock
Replacement: strut mount – AUDI A8 (4D2, 4D8). AUTODOC experts recommend:
- The replacement procedure is identical for the mounts of the left and right shock struts of the front suspension.
- All mounts of the front shock struts should be replaced simultaneously.
- Warning! Shut down the engine before starting any work – AUDI A8 (4D2, 4D8).
Carry out replacement in the following order:
- Step 1
Secure the wheels with chocks. - Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #17. - Step 3
Raise the front of the car and secure on supports. - Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. AUDI A8 (4D2, 4D8) - Step 5
Remove the wheel. - Step 6
Clean the fastening bolt that connects the shock absorber fork with the lower control arm. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fastening bolt that connects the shock absorber fork with the lower control arm. Use a combination spanner #18. Use a drive socket #18. Use a ratchet wrench. - Step 8
Remove the fastening bolt. - Step 9
Unscrew the upper arm fastenings. Use a combination spanner #17. Use a drive socket #17. Use a ratchet wrench. - Step 10
Remove the fastening bolt. Use a pin punch. Use a hammer. - Step 11
Remove the control arms. Use a flat metal-working chisel. Use a hammer. - Step 12
Detach the bottom part of the shock strut. - Step 13
Lower the car. - Step 14Open the bonnet.Step 15Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 16
Remove the protective caps out of the shock absorber mounting fastener. Use a flat screwdriver. Use pliers. - Step 17
Unscrew the upper fasteners of the shock strut. Use a drive socket #13. Use a ratchet wrench.Replacement: strut mount – AUDI A8 (4D2, 4D8). Tip from AUTODOC experts:To avoid injuries, hold the shock strut when undoing the fastening bolts. - Step 18
Remove the suspension strut. - Step 19
Set the shock absorber strut on the spring compressor tool.Replacement: strut mount – AUDI A8 (4D2, 4D8). Professionals recommend:Note that when using a spring compressor, spring coils need to be securely gripped, compressing the spring on the opposite sides.Ensure the correct position of the spring in the retainer.Make sure that the spring coils tightly entered the lock handles. - Step 20Compress the spring.Step 21
Treat the shock strut rod. Use a wire brush. Use WD-40 spray. - Step 22
Remove the strut piston rod nut. Use a drive socket #18. Use a ratchet wrench. - Step 23
Remove the top strut mount.Replacement: strut mount – AUDI A8 (4D2, 4D8). Tip from AUTODOC:Examine the shock absorber dust cap and the bump stop. Replace them if necessary. - Step 24
Install a new top shock strut mount. - Step 25
Tighten the shock strut piston rod nut. Use a drive socket #18. Use HEX No.H6. Use a torque wrench. Tighten it to 50 Nm torque.Replacement: strut mount – AUDI A8 (4D2, 4D8). AUTODOC recommends:Check to make sure the spring is positioned correctly. Avoid its misalignment. - Step 26Decompress the spring.Step 27Remove the assembled shock strut.Step 28
Install the shock strut into the wheel arch. - Step 29
Secure the upper fasteners of the shock strut.AUTODOC recommends:AUDI A8 (4D2, 4D8) – To avoid injury, hold the suspension strut while screwing in the fastening bolts.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A8 D2 (4D2, 4D8) model
Popular maintenance tutorials for Audi A8 D2
Complete guides for changing the Strut mount on different AUDI A8 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A8 (4D2, 4D8)
View more
How do EGR valves work? | AUTODOC
Drive with Care: 8 Common Bad Driving Habits Explained | AUTODOC
5 signs of a faulty strut mount and how to fix it
What causes engine misfire? | AUTODOC
Most commonly replaced car parts on AUDI A8
Time to replace parts? Get even better deals in our Shop app.

SCAN ME

































