Important!
This replacement procedure can be used for:
PEUGEOT 207 Saloon 1.4 View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Shock Absorber for 207 Saloon and other PEUGEOT models
Tools
Replacement: shock absorbers – PEUGEOT 207 Saloon. Tools you'll need:
Wire brush
WD-40 spray
All-purpose cleaning spray
Copper grease
Torque wrench
Combination spanner #16
Drive socket # 16
Drive socket # E16
Wheel impact socket #17
Ratchet wrench
Clip removal tool
Hydraulic transmission jack
Wheel chock
Replacement: shock absorbers – PEUGEOT 207 Saloon. AUTODOC recommends:
  • Both shock absorbers of the rear suspension should be replaced simultaneously.
  • The replacement procedure is identical for the left and right shock absorbers of the rear suspension.
  • Please note: all work on the car – PEUGEOT 207 Saloon – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Secure the wheels with chocks.
    Step 2
    How to change Shock Absorber on Peugeot 207 Saloon 2007 - free PDF and video manuals
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  2. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    How to replace PEUGEOT 207 Saloon 1.4 2008 Shock Absorber - step-by-step manuals and video guides
    Unscrew the wheel bolts.
    AUTODOC recommends:
    Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. PEUGEOT 207 Saloon
  3. Step 5
    Peugeot 207 Saloon 2.0 HDi 2009 Shock Absorber replacement: free workshop manuals
    Remove the wheel.
  4. Step 6
    Changing Shock Absorber on PEUGEOT 207 Saloon 1.6 16V 2010 by yourself
    Remove the plastic clips of the wheel arch liner. Use a clip removal tool.
  5. Step 7
    How to remove PEUGEOT 207 1.9 XSD 2011 Shock Absorber - online easy-to-follow instructions
    Remove the wheel arch cover.
  6. Step 8
    How to replace Shock Absorber on PEUGEOT 207 Saloon 2012: download PDF manuals and video instructions
    Support the rear suspension beam. Use a hydraulic transmission jack.
  7. Step 9
    How hard is it to do yourself: Shock Absorber replacement on Peugeot 207 Saloon 1.6 Bioflex 2013 - download illustrated guide
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 10
    Need to know how to renew Shock Absorber on PEUGEOT 207 2014? This free workshop manual will help you to do it yourself
    Unscrew the upper fastener of the shock absorber. Use a combination spanner #16. Use a drive socket #16. Use a ratchet wrench.
  9. Step 11
    Changing of Shock Absorber on Peugeot 207 Saloon 2007 won't be an issue if you follow this illustrated step-by-step guide
    Remove the fastening bolt.
  10. Step 12
    PEUGEOT 207 2.0 HDi Shock Absorber replacement: online guides and video tutorials
    Clean the shock absorber fasteners. Use a wire brush. Use WD-40 spray.
  11. Step 13
    Replacing Shock Absorber on Peugeot 207 Saloon 2009 1.4 by yourself
    Unscrew the lower fastener of the shock absorber. Use a drive socket #E16. Use a ratchet wrench.
  12. Step 14
    207 Saloon 1.9 XSD 2010 Shock Absorber DIY replacement workshop manual
    Remove the fastening bolt.
    Replacement: shock absorbers – PEUGEOT 207 Saloon. Tip from AUTODOC experts:
    To avoid injuries, hold the shock absorber when undoing the fastening bolts.
  13. Step 15
    How to change Shock Absorber on PEUGEOT 207 Saloon 2011 - tips and tricks
    Remove the shock absorber.
  14. Step 16
    Step-by-step recommendations for DIY replacement Peugeot 207 Saloon 2012 1.9 XSD Shock Absorber
    Clean the shock absorber mounting seats. Use a wire brush. Use WD-40 spray.
    AUTODOC recommends:
    Before installing a new shock absorber you should pump it manually 3-5 times.
  15. Step 17
    DIY replacement of Shock Absorber on PEUGEOT 207 Saloon 1.6 2013 is not an issue anymore with our step-by-step tutorial
    Place the shock absorber in the wheel arch and fasten it.
  16. Step 18
    Install the fastening bolt.
    Step 19
    How to change Shock Absorber on Peugeot 207 Saloon 2007 - free PDF and video manuals
    Screw in the lower fastener of the shock absorber. Use a drive socket #E16. Use a ratchet wrench.
    AUTODOC recommends:
    PEUGEOT 207 Saloon – To avoid injury, hold the shock absorber while screwing in the fastening bolts.
  17. Step 20
    How to replace PEUGEOT 207 Saloon 1.4 2008 Shock Absorber - step-by-step manuals and video guides
    Install the fastening bolt.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the PEUGEOT 207 Saloon model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
PEUGEOT 207 Saloon Shock Absorber replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY PEUGEOT 207 Saloon Shock Absorber replacement - online guide
Tips & tricks for your PEUGEOT 207 Saloon
View more
  • How to change Shocks on PEUGEOT 207 Saloon 1.6 - replacement tricks
    What to do if the ABS light comes on | AUTODOC tips
  • Changing Shock absorbers Peugeot 207 Saloon 1.4 - Replacement Tips
    What to do if your car heater isn't working | AUTODOC tips
  • Maintenance Hacks - PEUGEOT 207 Saloon 2.0 HDi Struts replacement guide
    4 reasons why your CHECK ENGINE light is on | AUTODOC tips
  • Replace Struts and shocks on Peugeot 207 Saloon - free video tips
    DIY car soundproofing | AUTODOC tips