How to change rear brake pads on VW Touran 1T1 1T2 – replacement guide
VW TOURAN (1T1, 1T2) 2.0 TDI, VW TOURAN (1T1, 1T2) 1.6, VW TOURAN (1T1, 1T2) 1.9 TDI, VW TOURAN (1T1, 1T2) 2.0 TDI 16V, VW TOURAN (1T1, 1T2) 1.9 TDI, VW TOURAN (1T1, 1T2) 2.0 TDI, VW TOURAN (1T1, 1T2) 2.0 EcoFuel, VW TOURAN (1T1, 1T2) 1.4 TSI, VW TOURAN (1T1, 1T2) 1.4 TSI, VW TOURAN (1T1, 1T2) 1.4 TSI EcoFuel, VW TOURAN (1T1, 1T2) 1.6 BiFuel … View more
The steps may slightly vary depending on the car design.
How to change rear brake pads / rear brake pad set on VW TOURAN 1 (1T1, 1T2) [TUTORIAL AUTODOC]
Brake pad set
- Perform the replacement of brake pads in complete set for each axis. This provides effective braking.
- The replacement procedure is identical for all brake pads on the same axle.
- All work should be done with the engine stopped.
- Step 1
Open the bonnet. Unscrew the brake fluid reservoir cap.
- Step 2
Secure the wheels with chocks.
- Step 3
Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 4
Raise the rear of the car and secure on supports.
- Step 5
Unscrew the wheel bolts.
AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VW Touran 1T1 1T2
- Step 6
Remove the wheel.
- Step 7
Clean the brake caliper fasteners. Use a wire brush. Use WD-40 spray.
- Step 8
Unscrew the brake caliper fastening. Use a combination spanner #13.
- Step 9
Remove the brake caliper. Use a crowbar.
Replacement: brake pads – VW Touran 1T1 1T2. AUTODOC experts recommend:Tie the caliper to the suspension or to the body with a wire without disconnecting from the brake hose to prevent depressurization of the brake system.Make sure that the brake caliper is not hanging on the brake hose.Don't press the brake pedal after the brake caliper has been removed. As a result, the piston can fall out from the brake cylinder, and brake fluid leakage and depressurization of the system may occur. Check the brake caliper bracket, brake caliper guide pins and boots. Clean them. Replace, if necessary.
- Step 10
Remove the brake pads. Use a crowbar.
Replacement: brake pads – VW Touran 1T1 1T2. Tip from AUTODOC:Measure the brake disc thickness. Upon reaching the wear limit the part must be replaced.
- Step 11
Clean the brake caliper bracket from dirt and dust. Use a wire brush. Use a brake cleaner.
AUTODOC recommends:Replacement: brake pads – VW Touran 1T1 1T2. After applying the spray, wait a few minutes.
- Step 12
Treat the brake pads in the area where their surface comes into contact with the brake caliper bracket. Use anti-squeal paste.
Replacement: brake pads – VW Touran 1T1 1T2. Tip:Make sure the disc surface is clean before installing the pads.
- Step 13
Install new brake pads.
Replacement: brake pads – VW Touran 1T1 1T2. Tip from AUTODOC:Make sure the pads are installed with linings facing the disc.
- Step 14
Treat the brake caliper piston. Use a brake cleaner.
Replacement: brake pads – VW Touran 1T1 1T2. Tip from AUTODOC experts:After applying the spray, wait a few minutes.
Find out which tyre and wheel sizes are compatible with the VW Touran I (1T1, 1T2) model
Popular maintenance tutorials for Touran Mk1
Free download PDF 1.88 MB
Free download PDF 1.73 MB
Free download PDF 2.14 MB
Free download PDF 1.92 MB
Free download PDF 2.26 MB
Free download PDF 1.29 MB
Complete guides for changing the Brake pad set on different VW TOURAN models
- Free download PDF 1.73 MB
Free download PDF 1.82 MB
Free download PDF 1.9 MB
Free download PDF 1.63 MB
Free download PDF 1.52 MB
Free download PDF 2.84 MB
Track expenses, manage logs, schedule replacements, and more.
When, why, and how to change engine oil | AUTODOC tips
Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
How to inspect and troubleshoot your car heater when it’s not working
5 reasons why your car is making a knocking sound
Most commonly replaced car parts on VW TOURAN
