Important!
This replacement procedure can be used for:
VOLVO V70 I (875, 876) 2.0, VOLVO V70 I (875, 876) 2.4, VOLVO V70 I (875, 876) 2.4, VOLVO V70 I (875, 876) 2.4 Turbo, VOLVO V70 I (875, 876) 2.4 Turbo AWD, VOLVO V70 I (875, 876) 2.3 T-5, VOLVO V70 I (875, 876) 2.5 TDI, VOLVO V70 I (875, 876) 2.0 Turbo, VOLVO V70 I (875, 876) 2.0, VOLVO V70 I (875, 876) 2.3 Turbo, VOLVO V70 I (875, 876) 2.0 Turbo, VOLVO V70 I (875, 876) 2.0, VOLVO V70 I (875, 876) 2.0 Turbo AWD, VOLVO V70 I (875, 876) 2.3 T-5 AWD, VOLVO V70 I (875, 876) 2.4 Bifuel, VOLVO V70 I (875, 876) 2.4, VOLVO V70 I (875, 876) 2.3 T AWD, VOLVO V70 I (875, 876) 2.4 Bifuel, VOLVO V70 I (875, 876) 2.4, VOLVO V70 I (875, 876) 2.4 Turbo AWD, VOLVO V70 I (875, 876) 2.0, VOLVO V70 I (875, 876) 2.3 AWD, VOLVO V70 I (875, 876) 2.5 TDi AWD, VOLVO V70 I (875, 876) 2.4 AWD, VOLVO V70 I (875, 876) 2.3 AWD View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for V70 I (875, 876) and other VOLVO models
Alternative products
How to change Anti-roll bar link on Volvo v70 1 2.5 TDI – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – VOLVO V70 I (LV). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #18
Torx bit T40
Ratchet wrench
Torque wrench
AUTODOC recommends:
  • Replace the stabiliser links on VOLVO V70 I (LV) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – VOLVO V70 I (LV). Recommended sequence of steps:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Step 2
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 3
    How to change Anti Roll Bar Links on Volvo v70 1 1995 - free PDF and video manuals
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
  2. Step 4
    How to replace VOLVO V70 I (875, 876) 2.5 TDI 1996 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
  3. Step 5
    Remove the fastening bolt.
    Step 6
    Volvo v70 1 2.4 1997 Anti Roll Bar Links replacement: free workshop manuals
    Remove the stabilizer rod.
    Replacement: anti roll bar links – VOLVO V70 I (LV). AUTODOC experts recommend:
    Examine stabiliser bushes. Replace them if needed.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VOLVO V70 I (LV, 875, 876) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VOLVO V70 I (875, 876) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VOLVO V70 I (875, 876)
View more
  • How to change Drop links on VOLVO V70 I (875, 876) 2.4 Turbo - replacement tricks
    How to Prevent Premature Wear on Your Car Boot Damper | AUTODOC
  • Changing Stabilizer link Volvo v70 1 2.5 TDI - Replacement Tips
    How to fix your car with AUTODOC CLUB
  • Maintenance Hacks - VOLVO V70 I (875, 876) 2.4 Sway bar link replacement guide
    Regain Your Confidence on the Road: Easy Headlight Restoration Tips
  • Replace Drop link on Volvo v70 1 - free video tips
    What to do if the ABS light comes on: DIY Diagnostics Tips

Professional manuals for the most common VOLVO models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VOLVO V70 I (875, 876) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME