Disclaimer
How to change rear anti roll bar links on VOLVO S80 I (184) – replacement guide
downloads:
1
Views:
12
Important!
This replacement procedure can be used for:
VOLVO S80 I (184) 2.9, VOLVO S80 I (184) T6, VOLVO S80 I (184) 2.4, VOLVO S80 I (184) 2.0 T, VOLVO S80 I (184) 2.5 TDI, VOLVO S80 I (184) 2.0, VOLVO S80 I (184) 2.4, VOLVO S80 I (184) 2.9, VOLVO S80 I (184) 2.0 T, VOLVO S80 I (184) 2.4 T, VOLVO S80 I (184) D5, VOLVO S80 I (184) 2.4 Bifuel (CNG), VOLVO S80 I (184) 3.0, VOLVO S80 I (184) T6, VOLVO S80 I (184) 2.4 D, VOLVO S80 I (184) 2.5 T AWD, VOLVO S80 I (184) 2.5 T, VOLVO S80 I (184) 2.3 R, VOLVO S80 I (184) T5 AWD, VOLVO S80 I (184) 2.4 Bifuel (LPG), VOLVO S80 I (184) 2.9 … View more
The steps may slightly vary depending on the car design.
VOLVO S80 I (184) 2.9, VOLVO S80 I (184) T6, VOLVO S80 I (184) 2.4, VOLVO S80 I (184) 2.0 T, VOLVO S80 I (184) 2.5 TDI, VOLVO S80 I (184) 2.0, VOLVO S80 I (184) 2.4, VOLVO S80 I (184) 2.9, VOLVO S80 I (184) 2.0 T, VOLVO S80 I (184) 2.4 T, VOLVO S80 I (184) D5, VOLVO S80 I (184) 2.4 Bifuel (CNG), VOLVO S80 I (184) 3.0, VOLVO S80 I (184) T6, VOLVO S80 I (184) 2.4 D, VOLVO S80 I (184) 2.5 T AWD, VOLVO S80 I (184) 2.5 T, VOLVO S80 I (184) 2.3 R, VOLVO S80 I (184) T5 AWD, VOLVO S80 I (184) 2.4 Bifuel (LPG), VOLVO S80 I (184) 2.9 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Anti Roll Bar Links for S80 I (184) and other VOLVO models
Alternative products

Wire brush
WD-40 spray
Brake cleaner
Copper grease
Impact socket №18
Wheel impact socket #19
Ratchet wrench
Torque wrench
Wheel chock
AUTODOC recommends:
- Replace the stabiliser links on VOLVO S80 I (TS, XY) in pairs.
- The replacement procedure is identical for both stabiliser links on the same axle.
- All work should be done with the engine stopped.
Replacement: anti roll bar links – VOLVO S80 I (TS, XY). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2
Loosen the wheel mounting bolts. Use wheel impact socket #19. - Step 3Raise the rear of the car and secure on supports.Step 4
Unscrew the wheel bolts.AUTODOC recommends:Important! Hold the wheel while unscrewing the fastening bolts. VOLVO S80 I (TS, XY) - Step 5
Remove the wheel. - Step 6
Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray. - Step 7
Unscrew the fasteners connecting the stabiliser link to the stabiliser bar. Use a drive socket #18. Use a ratchet wrench. - Step 8
Unscrew the fastener connecting the stabilizer link to the control arm. Use a drive socket #18. Use a ratchet wrench. - Step 9
Remove the stabilizer rod.Replacement: anti roll bar links – VOLVO S80 I (TS, XY). Tip:Examine stabiliser bushes. Replace them if needed. - Step 10
Treat all joints of the stabiliser link. Use copper grease. - Step 11
Install a new rod, tighten the fasteners.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the VOLVO S80 I (TS, 184) model
Popular maintenance tutorials for Volvo S80 1
Complete guides for changing the Drop links on different VOLVO S80 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your VOLVO S80 I (184)
View more
Regain Your Confidence on the Road: Easy Headlight Restoration Tips
TOP 5 mistakes when replacing shock absorbers | AUTODOC tips
DIY jack restoration | AUTODOC tips
TOP 8 mistakes car owners make | AUTODOC tips
Most commonly replaced car parts on VOLVO S80
Time to replace parts? Get even better deals in our Shop app.

SCAN ME






















