Important!
This replacement procedure can be used for:
VOLVO S70 (874) 2.0, VOLVO S70 (874) 2.4, VOLVO S70 (874) 2.4, VOLVO S70 (874) 2.4 Turbo, VOLVO S70 (874) T5, VOLVO S70 (874) 2.5 TDI, VOLVO S70 (874) 2.0, VOLVO S70 (874) 2.0 Turbo, VOLVO S70 (874) 2.3 Turbo, VOLVO S70 (874) 2.0 Turbo, VOLVO S70 (874) 2.0, VOLVO S70 (874) 2.4 Bifuel, VOLVO S70 (874) 2.4, VOLVO S70 (874) 2.4, VOLVO S70 (874) 2.4 Bifuel, VOLVO S70 (874) 2.0, VOLVO S70 (874) 2.4 T5 AWD, VOLVO S70 (874) 2.4 AWD, VOLVO S70 (874) 2.4 AWD, VOLVO S70 (874) 2.5 TDi AWD, VOLVO S70 (874) 2.3, VOLVO S70 (874) 2.4 AWD, VOLVO S70 (874) 2.3 T5 AWD, VOLVO S70 (874) 2.4 AWD, VOLVO S70 (874) 2.4 Blu-Fuel View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for S70 (874) and other VOLVO models
Alternative products
How to change Anti-roll bar link on VOLVO S70 (LS) 2.4 – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – VOLVO S70 (LS). Tools you might need:
Wire brush
WD-40 spray
Copper grease
Combination spanner #18
Torx bit T40
Ratchet wrench
Torque wrench
AUTODOC recommends:
  • Replace the stabiliser links on VOLVO S70 (LS) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – VOLVO S70 (LS). Recommended sequence of steps:
  1. Step 1
    Lift the car using a jack or place it over an inspection pit.
    Step 2
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
    Step 3
    How to change Anti Roll Bar Links on VOLVO S70 (LS) 1996 - free PDF and video manuals
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
  2. Step 4
    How to replace VOLVO S70 (874) 2.4 1997 Anti Roll Bar Links - step-by-step manuals and video guides
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #18. Use Torx T40. Use a ratchet wrench.
  3. Step 5
    Remove the fastening bolt.
    Step 6
    VOLVO S70 (LS) 2.5 TDI 1998 Anti Roll Bar Links replacement: free workshop manuals
    Remove the stabilizer rod.
    Replacement: anti roll bar links – VOLVO S70 (LS). AUTODOC experts recommend:
    Examine stabiliser bushes. Replace them if needed.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the VOLVO S70 (LS, 874) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY VOLVO S70 (874) Anti Roll Bar Links replacement - online guide
Tips & tricks for your VOLVO S70 (874)
View more
  • How to change Drop links on VOLVO S70 (874) 2.0 - replacement tricks
    5 Essential Tips for beginner drivers: Avoid Common Mistakes
  • Changing Stabilizer link VOLVO S70 (LS) 2.4 - Replacement Tips
    Preventing Engine Failure: Head Gasket Inspection Tutorial | AUTODOC
  • Maintenance Hacks - VOLVO S70 (874) 2.5 TDI Sway bar link replacement guide
    How to Get the Best Deals on Car Parts | Save Money with AUTODOC
  • Replace Drop link on VOLVO S70 (LS) - free video tips
    DIY rear axle restoration | Drivetrain restoration – Part 2

Professional manuals for the most common VOLVO models

Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
VOLVO S70 (874) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME