Important!
This replacement procedure can be used for:
MERCEDES-BENZ CLK (C208) CLK 200 (208.335), MERCEDES-BENZ CLK (C208) CLK 230 Kompressor (208.347), MERCEDES-BENZ CLK (C208) CLK 320 (208.365), MERCEDES-BENZ CLK (C208) CLK 200 Kompressor (208.345), MERCEDES-BENZ CLK (C208) CLK 430 (208.370), MERCEDES-BENZ CLK (C208) CLK 55 AMG (208.374), MERCEDES-BENZ CLK (C208) CLK 200 Kompressor (208.344), MERCEDES-BENZ CLK (C208) CLK 230 Kompressor (208.348), MERCEDES-BENZ CLK (C208) CLK 55 AMG (208.374) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CLK (C208) and other MERCEDES-BENZ models
Alternative products
How to change Anti-roll bar link on CLK C208 CLK 320 (208.365) – step-by-step instructions for straightforward car repair Anti-roll bar link
Tools
Replacement: anti roll bar links – MERCEDES-BENZ CLK (C208). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Brake cleaner
High-temperature ceramic grease
Torque wrench
Drive socket # 10
Drive socket # 13
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ CLK (C208). AUTODOC recommends:
  • Replace the stabiliser links on MERCEDES-BENZ CLK (C208) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ CLK (C208). Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on CLK C208 1997 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ CLK (C208) CLK 320 (208.365) 1998 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    CLK C208 CLK 230 Kompressor (208.347) 1999 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – MERCEDES-BENZ CLK (C208). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on MERCEDES-BENZ CLK (C208) CLK 200 Kompressor (208.344) 2000 by yourself
    Remove the wheel.
  5. Step 6
    How to remove MERCEDES-BENZ CLK CLK 230 Kompressor (208.348) 2001 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench.
  6. Step 7
    How to replace Anti Roll Bar Links on MERCEDES-BENZ CLK (C208) 2002: download PDF manuals and video instructions
    Remove the control arm plastic cover.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on CLK C208 CLK 430 (208.370) 1997 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ CLK 1998? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench.
  9. Step 10
    Changing of Anti Roll Bar Links on CLK C208 1999 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19.
  10. Step 11
    MERCEDES-BENZ CLK CLK 320 (208.365) Anti Roll Bar Links replacement: online guides and video tutorials
    Remove the stabilizer rod.
  11. Step 12
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 13
    Replacing Anti Roll Bar Links on CLK C208 2001 CLK 320 (208.365) by yourself
    Install a new rod, tighten the fasteners. Use a crowbar.
  12. Step 14
    CLK (C208) CLK 230 Kompressor (208.348) 2002 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. Use a torque wrench. Tighten it to 30 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ CLK Coupe (C208) model

Unlock your car maintenance assistant!

Track expenses, manage logs, schedule replacements, and more.

DIY MERCEDES-BENZ CLK (C208) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ CLK (C208)
View more
  • How to change Drop links on MERCEDES-BENZ CLK (C208) CLK 200 (208.335) - replacement tricks
    Transform Your Car's Look: 6 Simple Accessories You Need to Try!
  • Changing Stabilizer link CLK C208 CLK 320 (208.365) - Replacement Tips
    Top 5 Car Interior Cleaning Mistakes You Should Avoid | AUTODOC Tips
  • Maintenance Hacks - MERCEDES-BENZ CLK (C208) CLK 230 Kompressor (208.347) Sway bar link replacement guide
    Easy Steps to Fix Minor Scratches on Your Vehicle | AUTODOC tips
  • Replace Drop link on CLK C208 - free video tips
    When, why, and how to change engine oil | AUTODOC tips
Autodoc CLUB App icon
Time to replace parts? Get even better deals in our Shop app.
MERCEDES-BENZ CLK (C208) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
SCAN ME