Important!
This replacement procedure can be used for:
MERCEDES-BENZ CLK Convertible (A208) CLK 230 Kompressor (208.448), MERCEDES-BENZ CLK Convertible (A208) CLK 200 Kompressor (208.444), MERCEDES-BENZ CLK Convertible (A208) CLK 55 AMG (208.474), MERCEDES-BENZ CLK Convertible (A208) CLK 430 (208.470), MERCEDES-BENZ CLK Convertible (A208) CLK 320 (208.465), MERCEDES-BENZ CLK Convertible (A208) CLK 230 Kompressor (208.447), MERCEDES-BENZ CLK Convertible (A208) CLK 200 (208.435), MERCEDES-BENZ CLK Convertible (A208) CLK 200 Kompressor (208.445) View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

All the parts you need to replace – Anti Roll Bar Links for CLK Convertible (A208) and other MERCEDES-BENZ models
Tools
Replacement: anti roll bar links – MERCEDES-BENZ CLK Convertible (A208). Tools you'll need:
Wire brush
WD-40 spray
Copper grease
Brake cleaner
High-temperature ceramic grease
Torque wrench
Drive socket # 10
Drive socket # 13
Combination spanner #13
Combination spanner #17
Combination spanner #19
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: anti roll bar links – MERCEDES-BENZ CLK Convertible (A208). AUTODOC recommends:
  • Replace the stabiliser links on MERCEDES-BENZ CLK Convertible (A208) in pairs.
  • The replacement procedure is identical for both stabiliser links on the same axle.
  • All work should be done with the engine stopped.
Replacement: anti roll bar links – MERCEDES-BENZ CLK Convertible (A208). Take the following steps:
  1. Step 1
    How to change Anti Roll Bar Links on Mercedes A208 1998 - free PDF and video manuals
    Secure the wheels with chocks.
  2. Step 2
    How to replace MERCEDES-BENZ CLK Convertible (A208) CLK 320 (208.465) 1999 Anti Roll Bar Links - step-by-step manuals and video guides
    Loosen the wheel mounting bolts. Use wheel impact socket #17.
  3. Step 3
    Raise the rear of the car and secure on supports.
    Step 4
    Mercedes A208 CLK 200 (208.435) 2000 Anti Roll Bar Links replacement: free workshop manuals
    Unscrew the wheel bolts.
    Replacement: anti roll bar links – MERCEDES-BENZ CLK Convertible (A208). Tip:
    To avoid injury, hold up the wheel when unscrewing the bolts.
  4. Step 5
    Changing Anti Roll Bar Links on MERCEDES-BENZ CLK Convertible (A208) CLK 230 Kompressor (208.447) 2001 by yourself
    Remove the wheel.
  5. Step 6
    How to remove MERCEDES-BENZ CLK CLK 230 Kompressor (208.448) 2002 Anti Roll Bar Links - online easy-to-follow instructions
    Unscrew the fasteners of the control arm plastic cover. Use a drive socket #10. Use a ratchet wrench.
  6. Step 7
    How to replace Anti Roll Bar Links on MERCEDES-BENZ CLK Convertible (A208) 1998: download PDF manuals and video instructions
    Remove the control arm plastic cover.
  7. Step 8
    How hard is it to do yourself: Anti Roll Bar Links replacement on Mercedes A208 CLK 430 (208.470) 1999 - download illustrated guide
    Clean the stabiliser link fasteners. Use a wire brush. Use WD-40 spray.
  8. Step 9
    Need to know how to renew Anti Roll Bar Links on MERCEDES-BENZ CLK 2000? This free workshop manual will help you to do it yourself
    Unscrew the fastener connecting the stabilizer link to the control arm. Use a combination spanner #13. Use a drive socket #13. Use a ratchet wrench.
  9. Step 10
    Changing of Anti Roll Bar Links on Mercedes A208 2001 won't be an issue if you follow this illustrated step-by-step guide
    Unscrew the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19.
  10. Step 11
    MERCEDES-BENZ CLK CLK 320 (208.465) Anti Roll Bar Links replacement: online guides and video tutorials
    Remove the stabilizer rod.
  11. Step 12
    Clean the mounting seats of the stabiliser link. Use a wire brush. Use WD-40 spray.
    Step 13
    Replacing Anti Roll Bar Links on Mercedes A208 1998 CLK 320 (208.465) by yourself
    Install a new rod, tighten the fasteners. Use a crowbar.
  12. Step 14
    CLK Convertible (A208) CLK 230 Kompressor (208.448) 1999 Anti Roll Bar Links DIY replacement workshop manual
    Tighten the fastener connecting the stabilizer link to the stabilizer bar. Use a combination spanner #17. Use a combination spanner #19. Use a torque wrench. Tighten it to 30 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ CLK Convertible (A208) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
MERCEDES-BENZ CLK Convertible (A208) Anti Roll Bar Links replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY MERCEDES-BENZ CLK Convertible (A208) Anti Roll Bar Links replacement - online guide
Tips & tricks for your MERCEDES-BENZ CLK Convertible (A208)
View more
  • How to change Drop links on MERCEDES-BENZ CLK Convertible (A208) CLK 200 Kompressor (208.444) - replacement tricks
    DIY valve cover restoration | AUTODOC tips
  • Changing Stabilizer link Mercedes A208 CLK 320 (208.465) - Replacement Tips
    TOP 8 mistakes car owners make | AUTODOC tips
  • Maintenance Hacks - MERCEDES-BENZ CLK Convertible (A208) CLK 200 (208.435) Sway bar link replacement guide
    5 car interior cleaning mistakes | AUTODOC tips
  • Replace Drop link on Mercedes A208 - free video tips
    Top 5 mistakes when working in the engine bay | AUTODOC tips