
Disclaimer
How to change rear ABS sensor on AUDI Q3 (8UB, 8UG) – replacement guide
downloads:
6
Views:
98
Important!
This replacement procedure can be used for:
AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 1.4 TSI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 1.4 TFSI … View more
The steps may slightly vary depending on the car design.
AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 1.4 TSI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 2.0 TDI, AUDI Q3 (8UB, 8UG) 1.4 TFSI … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – ABS Sensor for Q3 (8UB, 8UG) and other AUDI models
ABS sensor
Alternative products

Wire brush
WD-40 spray
All-purpose cleaning spray
Electronic spray
Multipurpose grease
Brake cleaner
Copper grease
Torque wrench
HEX bit No.H5
Wheel impact socket #17
Ratchet wrench
Crow bar
Wheel chock
Replacement: ABS sensor – AUDI Q3 (8U). Professionals recommend:
- All work should be done with the engine stopped.
Replacement: ABS sensor – AUDI Q3 (8U). Recommended sequence of steps:
- Step 1Secure the wheels with chocks.Step 2Loosen the wheel mounting bolts. Use wheel impact socket #17.
- Step 3Raise the rear of the car and secure on supports.Step 4Unscrew the wheel bolts.AUTODOC recommends:Warning! To avoid injury, hold the wheel while unscrewing the fastening bolts. AUDI Q3 (8U)
- Step 5Remove the wheel.
- Step 6Clean the ABS sensor fastener. Use a wire brush. Use WD-40 spray. Use all-purpose cleaning spray.
- Step 7Unscrew the ABS sensor fastener. Use HEX No.H5. Use a ratchet wrench.
- Step 8Disconnect the ABS sensor.
- Step 9Detach the ABS sensor connector.
- Step 10Treat the ABS sensor connector. Use dielectric grease.
- Step 11Clean the ABS sensor mounting seat. Use a wire brush. Use WD-40 spray.
- Step 12Attach the ABS sensor connector.
- Step 13Treat the ABS sensor fastener. Use a multipurpose grease. Use a crowbar.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI Q3 (8UB, 8UG) model
Popular maintenance tutorials for Audi Q3 8u
Complete guides for changing the Wheel speed sensor on different AUDI Q3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI Q3 (8UB, 8UG)
View more
- Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
- How to Safely Wash Your Car in Winter Without Damage | AUTODOC tips
- 3 essential tips for choosing summer tyres | Get ready for warmer weather
- 5 possible reasons why your car heater isn't working
Most commonly replaced car parts on AUDI Q3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME