
Disclaimer
How to change mass air flow sensor on AUDI A3 Hatchback (8L1) – replacement guide
downloads:
14
Views:
287
Important!
This replacement procedure can be used for:
AUDI A3 Hatchback (8L1) 1.6, AUDI A3 Hatchback (8L1) 1.6 … View more
The steps may slightly vary depending on the car design.
AUDI A3 Hatchback (8L1) 1.6, AUDI A3 Hatchback (8L1) 1.6 … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Mass Air Flow Sensor for A3 Hatchback (8L1) and other AUDI models
Mass air flow sensor
Alternative products

Electronic spray
Torque wrench
Drive socket # 7
Drive socket # 10
Ratchet wrench
Phillips screwdriver
Fender cover
Replacement: mass air flow sensor – AUDI A3 (8L1). AUTODOC recommends:
- Сlear the trouble codes from the electronic control unit if necessary.
- Make sure that no dust or dirt gets into the air duct components and the throttle body.
- Please note: all work on the car – AUDI A3 (8L1) – should be done with the engine switched off.
Carry out replacement in the following order:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3Detach the air duct housing from the air filter housing.
- Step 4Unscrew the fasteners of the heat shield of the air filter housing. Use a Phillips screwdriver.
- Step 5Remove the heat shield of the air filter housing.
- Step 6Detach the mass air flow sensor connector.
- Step 7Loosen the fastening clamp connecting the air duct to the air filter housing. Use a drive socket #7. Use a ratchet wrench.
- Step 8Unscrew the MAF sensor fasteners. Use a drive socket #10. Use a ratchet wrench.
- Step 9Remove the mass air flow sensor.
- Step 10Install a new mass air flow sensor.
- Step 11Tighten the MAF sensor fasteners. Use a drive socket #10. Use a torque wrench. Tighten it to 4 Nm torque.
- Step 12Screw the fastening clamp connecting the air duct to the air filter housing. Use a drive socket #7. Use a ratchet wrench.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the AUDI A3 Hatchback (8L1) model
Popular maintenance tutorials for Audi A3 8l1
Complete guides for changing the MAF sensor on different AUDI A3 models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your AUDI A3 Hatchback (8L1)
View more
- DIY vehicle AC compressor restoration
- Understanding Car Tools: The Key Differences You Need to Know | AUTODOC tips
- Stop Rust Before It Starts: Top 5 Tips for Car Body Protection | AUTODOC Insights
- The Ultimate Guide to Engine Bay Cleaning | AUTODOC
Most commonly replaced car parts on AUDI A3
Time to replace parts? Get even better deals in our Shop app.

SCAN ME