Disclaimer
How to change left engine mounts on MERCEDES-BENZ C-Class Saloon (W203) – replacement guide
downloads:
55
Views:
942
Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Saloon (W203) C 30 CDI AMG (203.018) … View more
The steps may slightly vary depending on the car design.
MERCEDES-BENZ C-Class Saloon (W203) C 30 CDI AMG (203.018) … View more
The steps may slightly vary depending on the car design.
This video shows the replacement procedure of a similar car part on another vehicle
All the parts you need to replace – Engine Mount for C-Class Saloon (W203) and other MERCEDES-BENZ models
Alternative products

Wire brush
WD-40 spray
Copper grease
Torque wrench
Drive socket # 10
Drive socket # 16
Ratchet wrench
Hydraulic transmission jack
Fender cover
Replacement: engine mounts – MERCEDES-BENZ C-CLASS (W203). AUTODOC experts recommend:
- All work should be done with the engine stopped.
Replacement: engine mounts – MERCEDES-BENZ C-CLASS (W203). Use the following procedure:
- Step 1Open the bonnet.Step 2Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.Step 3
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 4
Unscrew the upper fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench. - Step 5
Remove the fastening bolt. - Step 6Lift the car using a jack or place it over an inspection pit.Step 7
Undo the fasteners of the oil pan lower cover. Use a drive socket #10. Use a ratchet wrench. - Step 8
Remove the oil pan cover. - Step 9
Clean the engine mount fasteners. Use a wire brush. Use WD-40 spray. - Step 10
Unscrew the lower fastener of the engine mount. Use a drive socket #16. Use a ratchet wrench. - Step 11
Remove the fastening bolt. - Step 12
Support the engine in the oil pan area. Use a hydraulic transmission jack. - Step 13
Remove the engine mount.Replacement: engine mounts – MERCEDES-BENZ C-CLASS (W203). Tip from AUTODOC experts:Carefully check the other engine mounts and replace them if necessary. - Step 14
Clean the mounting seat of the engine mount. Use a wire brush. Use WD-40 spray. - Step 15
Install the engine mount to its mounting seat. - Step 16
Install the fastening bolt.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Need New Tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Saloon (W203) model
Popular maintenance tutorials for Mercedes W203
Complete guides for changing the Engine mounts on different MERCEDES-BENZ C-CLASS models
Unlock your car maintenance assistant!
Track expenses, manage logs, schedule replacements, and more.
Tips & tricks for your MERCEDES-BENZ C-Class Saloon (W203)
View more
Can You Hear Your Brakes Squeaking? Learn the Causes and DIY Solutions! | AUTODOC Tips
How to tell if a tie rod is faulty
Top 7 Manual Transmission Mistakes to Avoid | AUTODOC Tips
The Fast and Easy Way to Fix a Broken Wheel Stud | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS
Time to replace parts? Get even better deals in our Shop app.

SCAN ME





























