How to change serpentine belt on Mercedes W203 – replacement guide
downloads:
40
Views:
862
0
Users voted – 0
Recommended replacement interval for the part category Serpentine belt : 30000km
Important!
This replacement procedure can be used for:
MERCEDES-BENZ C-Class Saloon (W203) C 320 (203.064),
MERCEDES-BENZ C-Class Saloon (W203) C 240 4-matic (203.081),
MERCEDES-BENZ C-Class Saloon (W203) C 320 4-matic (203.084),
MERCEDES-BENZ C-Class Saloon (W203) C 240 (203.061)
…
View more
The steps may slightly vary depending on the car design.
How to change serpentine belt on MERCEDES-BENZ W203 C-Class [TUTORIAL AUTODOC]
All the parts you need to replace – Poly V-Belt for C-Class Saloon (W203) and other MERCEDES-BENZ models
Replacement: serpentine belt – Mercedes W203. AUTODOC experts recommend:
All work should be done with the engine stopped.
Carry out replacement in the following order:
Step 1
Open the bonnet.
Step 2
Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
Step 3
Remove the engine cover.
AUTODOC recommends:
Replacement: serpentine belt – Mercedes W203. Do not use excessive force when removing the part as this may damage it.
Step 4
Remove the air intake hoses.
Step 5
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Step 6
Remove the V-ribbed belt.
Replacement: serpentine belt – Mercedes W203. AUTODOC recommends:
Check the condition of the tensioner pulley and idler pulley. Replace them if necessary.
Step 7
Return the tensioner pulley to its initial position.
Step 8
Install the V-ribbed belt.
Replacement: serpentine belt – Mercedes W203. Tip from AUTODOC:
Make sure that the V-ribbed belt fits all pulleys snugly.
Step 9
Pull aside the V-ribbed belt tensioner pulley. Use a combination spanner #16.
Step 10
Place the V-ribbed belt on the tensioner pulley.
Step 11
Return the tensioner pulley to its initial position. Use a combination spanner #16.
Step 12
Reinstall the air intake hoses.
Step 13
Install the engine cover and secure it.
AUTODOC recommends:
Make sure the engine cover is properly seated. It should not be displaced with respect to the guiding fasteners and the throttle body air intake hose.Replacement: serpentine belt – Mercedes W203. Do not use excessive force during installation. This may damage the part.
Step 14
Remove the fender protection cover.
Step 15
Close the hood.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?
Find out which tyre and wheel sizes are compatible with the MERCEDES-BENZ C-Class Saloon (W203) model.
It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents
Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
Scan
To download the app:
- scan the QR code
- download from App Store
- download from Google Play
Tips & tricks for your MERCEDES-BENZ C-Class Saloon (W203)
View more
5 tools that make car repair incredibly simple | AUTODOC tips
5 Essential Tips for beginner drivers: Avoid Common Mistakes
How to replace a timing chain yourself
How to Polish Your Car Yourself and Save Money on Garage Services | AUTODOC tips
Most commonly replaced car parts on MERCEDES-BENZ C-CLASS