When to replace the Lambda Sensor on your VW JETTA
Recommended replacement interval for the part category Lambda sensor : 100000 km
Important!
This replacement procedure can be used for:
VW Jetta Mk5 (1K) 1.4 TSI, VW Jetta Mk5 (1K) 2.5, VW Jetta Mk5 (1K) 2.5, VW Jetta Mk5 (1K) 2.0 TFSI, VW Jetta Mk5 (1K) 2.0 FSI, VW Jetta Mk5 (1K) 1.6 FSI View more

The steps may slightly vary depending on the car design.

This video shows the replacement procedure of a similar car part on another vehicle

Tools
Replacement: lambda sensor – VW JETTA III (1K2). Tools you might need:
Electronic spray
High-temperature ceramic grease
Torque wrench
Drive socket # 10
22-mm oxygen sensor socket
Ratchet wrench
Thread tap
Fender cover
Replacement: lambda sensor – VW JETTA III (1K2). AUTODOC experts recommend:
  • After replacing the oxygen sensor, clear the trouble code from the electronic control unit and let the ECU adapt itself to the new sensor.
  • Before getting down to work, start the engine and let it warm up to operating temperature.
  • Please note: all work on the car – VW JETTA III (1K2) – should be done with the engine switched off.
Carry out replacement in the following order:
  1. Step 1
    Open the bonnet.
    Step 2
    Use a fender protection cover to prevent damaging paintwork and plastic parts of the car.
    Step 3
    Lift the car using a jack or place it over an inspection pit.
    Step 4
    How to change Lambda Sensor on VW Jetta 1k2 2005 - free PDF and video manuals
    Unscrew the fasteners of the oxygen sensor housing cover. Use a drive socket #10. Use a ratchet wrench.
  2. Step 5
    How to replace VW Jetta Mk5 (1K) 1.9 TDI 2006 Lambda Sensor - step-by-step manuals and video guides
    Remove the oxygen sensor housing cover.
  3. Step 6
    VW Jetta 1k2 1.6 2007 Lambda Sensor replacement: free workshop manuals
    Detach the oxygen sensor connector.
  4. Step 7
    Changing Lambda Sensor on VW Jetta Mk5 (1K) 1.6 FSI 2008 by yourself
    Unscrew the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a ratchet wrench.
  5. Step 8
    How to remove VW JETTA 2.0 TDI 2009 Lambda Sensor - online easy-to-follow instructions
    Remove the oxygen sensor.
  6. Step 9
    How to replace Lambda Sensor on VW Jetta Mk5 (1K) 2010: download PDF manuals and video instructions
    Cut the thread for the new oxygen sensor. Use a thread tap. Use a ratchet wrench.
  7. Step 10
    Treat the oxygen sensor. Use high-temperature ceramic grease.
    Step 11
    How hard is it to do yourself: Lambda Sensor replacement on VW Jetta 1k2 1.6 TDI 2005 - download illustrated guide
    Install the new oxygen sensor.
  8. Step 12
    Need to know how to renew Lambda Sensor on VW JETTA 2006? This free workshop manual will help you to do it yourself
    Tighten the oxygen sensor fastener. Use a 22-mm oxygen sensor socket. Use a torque wrench. Tighten it to 37 Nm torque.
Was this manual helpful?
Please rate this manual on a scale from 1 to 5. If you have any questions, feel free to ask us.
Users voted – 0
Searching for the right tyres?

Find out which tyre and wheel sizes are compatible with the VW Jetta Mk5 (1K) model.

Your profile is your personal assistant.

It can track car expenses, keep a car log and replacement schedule, and save favourite materials, notes and documents

Install the AUTODOC CLUB app!
Your personal car expenses manager, maintenance tips, reminders about upcoming appointments and service intervals, DIY repair instructions – all this on your phone.
VW Jetta Mk5 (1K) Lambda Sensor replace by yourself - Scan QR-code and download AUTODOC CLUB app
Scan

To download the app:

  • - scan the QR code
  • - download from App Store
  • - download from Google Play
DIY VW Jetta Mk5 (1K) Lambda Sensor replacement - online guide
Tips & tricks for your VW Jetta Mk5 (1K)
View more
  • How to change Oxygen sensor on VW Jetta Mk5 (1K) 2.0 TDI 16V - replacement tricks
    How to choose the right engine oil for your car | AUTODOC
  • Changing O2 sensor VW Jetta 1k2 1.9 TDI - Replacement Tips
    TOP 6 WD-40 lifehacks | AUTODOC tips
  • Maintenance Hacks - VW Jetta Mk5 (1K) 1.6 NOx sensor replacement guide
    Car checks you need to carry out on your car after the winter | AUTODOC tips
  • Replace Lambda sensors on VW Jetta 1k2 - free video tips
    Top 5 brake repair mistakes | AUTODOC tips